メインコンテンツまでスキップ

「 SensorReadingFailed 」:エレメントソフトウェアで IPMI 診断が現在応答していません

Views:
47
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

のしんだ

環境

  • NetApp Element ソフトウェア
  • NetApp Hシリーズ ストレージ ノード
  • NetApp SF-Series ストレージノード

問題

NetApp SolidFire Active IQ から報告されるアラートは次のとおりです。

  • NetApp Element ソフトウェア12.5の場合:
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • BmcSelfTestFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element ソフトウェア 12.3 では、次の手順を実行
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element ソフトウェア 12.2 では、次の手順を実行
    • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
    • Only a single complete copy of the block data is accessible. Restore any offline nodes or block services or contact support for assistance.
  • Element ソフトウェア 11.x 以降:
    • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • Element ソフトウェア 10.x 以前:
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device