メインコンテンツまでスキップ

NDE またはスケールに障害が発生した場合に NDE プロセスを再起動するにはどうすればよいですか

Views:
37
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

環境

NetApp HCI バージョン 1.6 以前

回答

  • ノード UI https://<Node MIP>:442へのアクセス ()
  • 「システムユーティリティ」タブをクリックし、「サービスの再起動」の下に次のように入力します。
    • サービス: SF-NDE
    • 処置:再起動してください

バージョン 1.7 以降では、 NDE を手動で再起動せずに再実行できます。

追加情報

動作しないシナリオがある場合は、次のいずれかの方法で対処してください。

  • 別のストレージノードで NDE スケールを実行(任意のストレージノードの MIP に移動)
  • Scale がリセットされるまで 72 時間待ってから再実行してください 任意のストレージノードから取得できます
  • ネットアップサポートに問い合わせて、この問題に対するパッチを適用できます
  • (新規インストールの場合) HCI バージョン 1.7 以降を使用して導入します

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.