メインコンテンツまでスキップ

hardwareConfigMismatch アラートは、クラスタに新しいノードを追加したあとに生成されます

Views:
5
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
solidfire
Last Updated:

環境

  • NetApp HCI
  • NetApp H610S ストレージノード

問題

  • ネットワークファームウェアバージョンと BIOS 設定のアラートは、クラスタにノードを追加するとトリガーされます
  • NetApp SolidFire Active IQ から報告されるアラートは次のとおりです。
    • NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.22.1002 (MT_2420110034) but is 14.25.1020 (MT_2420110034)
    • NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.22.1002 (MT_2420110034) but is 14.25.1020 (MT_2420110034)
    • Incorrect bios setting "allow_correctables" should be == enable but is null
  • エラー コード:
    • hardwareConfigMismatch

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.