メインコンテンツへスキップ

Brocade FCポートがオフラインで、スイッチSFPの障害が原因でNo_Sync状態

Views:
450
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

環境

  • Brocade FCスイッチ
  • ファブリックOS(FOS) 

問題

  • BrocadeのFCポートがswitchshow出力と同様にNo_Sync 状態およびdisabled 状態である

/fabos/bin/switchshow :
Index Slot Port Address Media  Speed     State   Proto
============================================================
 106   11   10   676a40   id   N32  No_Sync   FC  Disabled

  • sfpshow Tx値が推奨範囲にないことを表示します。

=============
Slot 11/Port 10:
=============
Transceiver: 6804404000000000 8,16,32_Gbps M5 sw Short_dist
Vendor PN:   57-1000333-01
RX Power:   -2.2   dBm (604.6uW)
TX Power:   -27.2   dBm (1.9   uW)

メモ:Disabled port and TX power is -40は、レーザーがオフになっていることを示し、必ずしも障害を示しているわけではありません。

  • ポートをイネーブルにすると、TX電力が300 UW未満のままであることが確認される

  • Brocade FCポートがswitchshow 出力と同様にNo_Sync 状態である

/fabos/bin/switchshow :
Index Slot Port Address Media  Speed     State   Proto
============================================================
127   12   15   107f40   id   N32     No_Sync   FC

  • Porterrshow pcs erroruncorr errorsc3 discards などの多くのメディアエラーと、link fail  およびloss_sig エラーを報告します。

/fabos/cliexec/porterrshow :
      frames     enc    crc    crc    too    too    bad    enc   disc   link  loss  loss  frjt   fbsy    c3timeout   pcs   uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail  sync  sig           tx    rx    err    err
  296:   12.4k   12.1k   0     0     0     0     0     0     0    11    1.5k   57.3k    9.2k  0     0    11     0   252   43.7k

 

  • portstatsshow 出力は、ポートがoffline & no_syn cステートであり、ディセーブル理由がport throttledあることを示します。

portshow 127
portDisableReason: Port Throttled
portCFlags: 0x0
portFlags: 0x61   PRESENT DISABLED
LocalSwcFlags: 0x0
portType:  26.0
portState: 2      Offline
Protocol: FC
portPhys:  5      No_Sync       portScn:   2      Offline

  • portstatsshow 出力は、ポートがoffline & no_syn cステートであることを示します。

portshow 330
portDisableReason: None
portCFlags: 0x0
portFlags: 0x4021        PRESENT U_PORT DISABLED LED
LocalSwcFlags: 0x0
portType:  26.0
portState: 2      Offline
Protocol: FC
portPhys:  5      No_Sync       portScn:   2      Offline

  • Errdump リンク障害および損失信号エラーをルールとともにレポート-defNON_E_F_PORTSSTATE_CHG_20_FENCE  およびALL_SFP_32GSWL_TX_POWER_251 がトリガーされる

2023/01/20-15:37:58, [MAPS-2022], 23317, SLOT 1 | FID 128, WARNING, SWITCHXX, slot6 port8 HBAXX_HBA1 DISABLED_LR_11112022, U-Port 6/8, Condition=ALL_PORTS(LOSS_SIGNAL/min>3), Current Value:[LOSS_SIGNAL, 70 LOS], RuleName=defALL_PORTSLOSS_SIGNAL_3, Dashboard Category=Port Health.
2023/01/20-15:38:28, [MAPS-2018], 23318, SLOT 1 | FID 128, WARNING, SWITCHXX, slot6 port8 HBAXX_HBA1 DISABLED_LR_11112022, U-Port 6/8, Condition=ALL_PORTS(LF/min>3), Current Value:[LF, 4 LFs], RuleName=defALL_PORTSLF_3, Dashboard Category=Port Health.
2023/03/06-17:48:07, [MAPS-1003], 89981, SLOT 1 | FID 128, WARNING, SWITCHXX, slot9 port15, U-Port 9/15, Condition=NON_E_F_PORTS(STATE_CHG/min>11), Current Value:[STATE_CHG, 14], RuleName=defNON_E_F_PORTSSTATE_CHG_11, Dashboard Category=Port Health.
2023/03/06-17:48:13, [MAPS-1010], 89983, SLOT 1 | FID 128, ERROR, SWITCHXX, Port(s) fenced due to RuleName=defNON_E_F_PORTSSTATE_CHG_20_FENCE, Condition=NON_E_F_PORTS(STATE_CHG/min>20), Obj:slot9 port15, U-Port 9/15 [ STATE_CHG,21]
2023/06/15-18:16:27, [MAPS-1005], 182673, SLOT 1 | FID 128, WARNING, H1NETxxx, SFP 12/15, Condition=ALL_32GSWL_SFP(TXP<=251), Current Value:[TXP, 251 uW], Rule ALL_SFP_32GSWL_TX_POWER_251 triggered 57 times in 1 day and last trigger time Thu Jun 15 16:38:27 2023, Dashboard Category=Port Health.
023/06/14-17:29:26, [MAPS-1003], 182281, SLOT 1 | FID 128, WARNING, H1NETxxx, slot12 port15, F-Port 12/15, Condition=ALL_HOST_PORTS(LR/min>1), Current Value:[LR, 2 LRs], RuleName=ALL_HOST_PORTS_LR_1_ELK, Dashboard Category=Port Health.
2023/06/14-17:30:08, [MAPS-1003], 182282, SLOT 1 | FID 128, WARNING, H1NETxxx, slot12 port15, F-Port 12/15, Condition=ALL_HOST_PORTS(LR/min>4), Current Value:[LR, 5 LRs], RuleName=ALL_HOST_PORTS_LR_4, Dashboard Category=Port Health.
2023/06/14-17:30:26, [MAPS-1003], 182283, SLOT 1 | FID 128, WARNING, H1NETxxx, slot12 port15, F-Port 12/15, Condition=ALL_HOST_PORTS(LR/min>1), Current Value:[LR, 8 LRs], RuleName=ALL_HOST_PORTS_LR_1_ELK, Dashboard Category=Port Health.          
2023/06/14-09:27:56 (IST), [MAPS-1003], 915764, SLOT 1 | FID 128 | PORT 9/42, WARNING, Brocade, slot9 port42-H.DELL_Chassis.xx.10.226.xx.xx.3F07xxx.SI, U-Port 9/42, Condition=ALL_OTHER_F_PORTS(STATE_CHG/min>5), Current Value:[STATE_CHG, 9], RuleName=defALL_OTHER_F_PORTSSTATE_CHG_5, Dashboard Category=Port Health, Quiet Time=None.
2023/06/14-09:27:56 (IST), [MAPS-1003], 915763, SLOT 1 | FID 128 | PORT 9/42, WARNING, Brocade, slot9 port42-H.DELL_Chassis.xx.10.226.xx.xx.3F07xx1.SI, U-Port 9/42, Condition=ALL_HOST_PORTS(STATE_CHG/min>5), Current Value:[STATE_CHG, 9],
RuleName= defALL_HOST_PORTSSTATE_CHG_5, Dashboard Category=Port Health, Quiet Time=None.

  • sfpshow 受信電力と送信電力が低いことをレポートします。

=============
Slot  6/Port  8:
=============
RX Power:    -5.5    dBm (284.6uW)
TX Power:    -inf    dBm (0.0   uW)

  • sfpshow 送信電力を-inf としてレポートします。

=============
Slot  9/Port 15:
=============
RX Power:   -1.2   dBm (751.4uW)
TX Power:   -inf   dBm (0.0   uW)

  • sfpshow 低Tx電力を報告します。

=============
Slot 12/Port 15:
=============
RX Power:   -2.5   dBm (556.0uW)
TX Power:   -8.4   dBm (144.1 uW)

  • Fabriclogは、次のようにリンクフラッピングを報告します。

17:47:01.645590 *Removing all nodes from port         A2,P0  A2,P0  79   NA
17:47:01.645838 SCN Port F_PORT                A2,P1  A2,P0  79   NA
17:47:01.646695 SCN Port Offline;rsn=0x3,g=0x66c       A2,P0  A2,P0  79   NA
17:47:01.646703 *Removing all nodes from port         A2,P0  A2,P0  79   NA
17:47:02.439648 SCN LR_PORT(0);g=0x66c            A2,P0  A2,P0  79   NA
17:47:03.316504 SCN LR_PORT(0);g=0x66c            A2,P0  A2,P0  79   NA
17:47:03.366059 SCN Port Online; g=0x66c,isolated=0      A2,P0  A2,P1  79   NA

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.