メインコンテンツまでスキップ

BrocadeスイッチポートがオフラインでLS Disabled(Eポートとしてロック)状態

Views:
9
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade<a>2009758257</a>
Last Updated:

環境

Brocadeスイッチ

問題

  • Brocade FCポートがNo_Sync状態であり、   switchshow 出力のLSがDisabledになっている
Index Slot Port Address Media  Speed     State   Proto
============================================================
 262   3  38  668ec0  id   16G  No_Sync   FC LS Disabled (Locked as E-port)
  • porterrorshow ポートでエラーは報告されません。
/fabos/cliexec/porterrshow :
      frames     enc   crc   crc   too   too   bad   enc   disc   link   loss   loss   frjt   fbsy   c3timeout   pcs    uncor
     tx    rx    in   err   g_eof  shrt   long   eof   out   c3    fail   sync   sig            tx    rx    err   err
 262:   5    5    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
  • sfpshow Tx stat as-infおよびLow Rx powerをレポートします。
Slot  3/Port 38:
=============
Identifier:  3   SFP
Connector:  7   LC
Transceiver: 6801001200000000 8,16,32_Gbps SM lw Extended Long_dist
[...........]
Vendor Name: BROCADE
Vendor OUI:  00:05:1e
Vendor PN:  57-1000335-01
[...........]
Temperature: 60    Centigrade
Current:   0.000  mAmps
Voltage:   3318.0  mVolts
RX Power:   -13.8  dBm (41.6 uW)
TX Power:   -inf   dBm (0.0  uW)
  • portshow 影響を受けたポートのうち、 Locked as E-port statusと報告されています。

portshow 262
portDisableReason: Locked as E-port
portCFlags: 0x0
portFlags: 0x4021  PRESENT U_PORT DISABLED LED
LocalSwcFlags: 0x0
portType:  26.0
portState: 2 Offline
Protocol: FC
portPhys:  5 No_Sync   portScn:   2 Offline
port generation number:    0
state transition count:    1

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.