メインコンテンツへスキップ

Brocadeスイッチポートに対して発生する継続的なリンクリセット(LR)

Views:
1,046
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

環境

  • すべてのBrocade FCスイッチプラットフォーム
  • すべてのBrocadeファブリックOSファームウェアレベル

問題

  • 1つのポートでのリンクリセットが報告されます。

2020/09/01-09:22:48 (CET), [C5-1014], 2001, CHASSIS | PORT 0/13, WARNING, BrocadeG720,  Link Reset on Port S0,P13(52) vc_no=0 crd(s)lost=5 auto trigger.

  • errdump -a に示されているポート番号のMAPによってレポートされた継続的なリンクリセット(LR):
2020/09/01-14:54:34, [MAPS-1003], 796, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 2], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
2020/09/01-15:16:53, [LOG-1000], 798, FID 128, INFO, brocade_switch, Previous message repeated 2 time(s).
2020/09/01-15:20:34, [MAPS-1003], 799, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 2], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
2020/09/01-15:46:53, [LOG-1000], 802, FID 128, INFO, brocade_switch, Previous message repeated 3 time(s).
2020/09/01-15:46:58, [MAPS-1003], 803, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 4], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
2020/09/01-15:56:10, [MAPS-1003], 804, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 2], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
2020/09/01-16:01:22, [MAPS-1003], 805, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 4], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
2020/09/01-16:16:53, [LOG-1000], 806, FID 128, INFO, brocade_switch, Previous message repeated 1 time(s).
2020/09/01-16:23:40, [MAPS-1003], 807, FID 128, WARNING, brocade_switch, onpom_fc0, F-Port 13, Condition=ALL_F_PORTS(LR/min>=1), Current Value:[LR, 4], RuleName=CNLV_CMPLNT_LR, Dashboard Category=Port Health.
 
  • portershowが過剰なリンク障害カウンタを報告していることを確認します。

      frames    enc   crc   crc   too   too   bad   enc   disc   link   loss   loss   frjt   fbsy  c3timeout   pcs   uncor
    tx    rx    in   err   g_eof  shrt   long   eof    out   c3   fail   sync   sig          tx   rx    err   err
376:  298.7k 501.9k   0    0    0    0    0    0    0    0    9.9k   0    0    0    0    0    0    0    0

  • portshow での割り込み、lli、proc_rqrd、lr_in、lr_out、ols_in、ols_outの増加:

portshow 13
portDisableReason: None
portCFlags: 0x1
portFlags: 0x24b03    PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP LED ACCEPT FLOGI
LocalSwcFlags: 0x0
portType:  26.0
POD Port: Port is licensed
portState: 1   Online   
Protocol: FC
portPhys:  6   In_Sync     portScn:   32   F_Port   
port generation number:   93268
state transition count:   92939    

portId:   0a0d00
portIfId:   43020034
portWwn:   20:0d:88:94:71:b1:69:c0
portWwn of device(s) connected:
   21:00:00:24:ff:1d:8c:e2
16b Area list:
Distance:  normal
portSpeed: N16Gbps

FEC: Inactive
Credit Recovery: Inactive
Aoq: Inactive
FAA: Inactive
F_Trunk: Inactive
LE domain: 0
Peer beacon: Off
FC Fastwrite: OFF
Interrupts:     9909    Link_failure: 3      Frjt:      0      
Unknown:       0      Loss_of_sync: 0      Fbsy:      0      
Lli:         9909    Loss_of_sig:  0      
Proc_rqrd:      211621   Protocol_err: 0      
Timed_out:      0      Invalid_word: 0      
Tx_unavail:     0      Invalid_crc:  0      
Delim_err:      0      Address_err:  0      
Lr_in:        4914    Ols_in:     4877    
Lr_out:       4877    Ols_out:    4914 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.