Brocadeスイッチが新しいファームウェアを使用したブートに失敗する

最後の更新
PDFとして保存

Views:: 1

Visibility:: Public

Votes:: 0

Category:: thirdparty

Specialty:: brocade<a>2009505249</a>

Last Updated:

環境

Brocade Fibre Channel（FC）スイッチ

問題

v8.2.1c からv8.2.2Dへのアップグレードの実行後にFOSスイッチがブートしない

SW7840:FID128:admin> firmwareshow -v Appl Primary/Secondary Versions ------------------------------------------ FOS v8.2.1c v8.2.1c DP v8.2.1c v8.2.1c

Firmware is being downloaded to the switch. This step may take up to 30 minutes. 2023/03/17-08:38:52, [SULB-1001], 105, CHASSIS, WARNING, Brocade7840, Firmwaredownload command has started. (From v8.2.1c To v8.2.2d). Preparing for firmwaredownload...

SW7840:FID128:admin> firmwareshow -v Appl Primary/Secondary Versions ------------------------------------------ FOS v8.2.2d v8.2.2d DP Unknown v8.2.1c

ブート中のシリアルコンソール出力

BootROM version: 1.0.82 ...

... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found setting prt to 2 Hit ESC to stop autoboot: 0 ** Bad partition 2 ** ** Bad partition 2 ** WARNING: adjusting available memory to 30000000 Wrong Image Format for bootm command ERROR: can't get kernel image!