メインコンテンツへスキップ

クラスタネットワーク上のリンクに問題があると、複数のクラスタポートでエラーが発生します

Views:
3
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009547578</a><a>for_translation</a>
Specialty:
hw
Last Updated:

環境

  • ONTAP 9
  • FAS / AFFシステム
  • スイッチクラスタネットワーク

問題

  • イベントログにクラスタポートについて次のエラーが報告され、クラスタネットワークがデグレード状態になっています。

[Node-01: intr: netif.linkErrors:error]: Excessive link errors on network interface e0a. Might indicate a bad cable, switch port, or NIC, or that a cable connector is not fully inserted in a socket. On a 10/100 port, might indicate a duplex mismatch.

[Node-01: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: CRC Errors Detected - High CRC errors detected on port e0a node Node-01

  • クラスタスイッチポートに着信するエラーに対して次のヘルスアラートが生成されます。

::> system health alert show
 

Node: node-01
Alert ID: ClusterIfInErrorsWarn_Alert
Resource: Ethernet1/7
Severity: Major
Indication Time: Wed Apr 19 08:45:22 2023
Suppress:
false
Acknowledge: false
Probable Cause: The percentage of inbound packet errors of switch interface "sw1(FOCXXXXXXX)/Ethernet1/7" is
above the warning threshold.

  • 報告されたクラスタポートのifstatの出力に多数のCRCエラーが表示されます。

::> system node run -node <node> -command ifstat <port>

-- interface  e0a  (62 days, 23 hours, 58 minutes, 45 seconds) --

RECEIVE
Total frames:   81107m | Frames/second:   14901  | Total bytes:     387t
Bytes/second:   71201k | Total errors:    1396k | Errors/minute:    15
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:  1646k
Non-primary u/c:    0  | CRC errors:     1396k | Runt frames:      0
Fragment:       0  | Long frames:     10  | Jabber:        0
Length errors:    108  | No buffer:       0  | Xon:          0
Xoff:         0  | Pause:         0  | Jumbo:       45712m
Noproto:        0  | Error symbol:     0  | Illegal symbol:    0

  • インターフェイスの統計情報には、スイッチインターフェイスのアラートに関する高入力エラーおよびCRCエラーが表示されます。

Switch-1#show interface Ethernet1/7

Ethernet1/7 is up

RX
    190220628517 unicast packets  802665 multicast packets  571723 broadcast packets
    190222002905 input packets  423856190729771 bytes
    44207022448 jumbo packets  0 storm suppression packets
    661 runts  0 giants 2775922 CRC  0 no buffer
   2905280 input error  0 short frame  0 overrun   0 underrun  0 ignored
    0 watchdog  0 bad etype drop  0 bad proto drop  0 if down drop
    0 input with dribble  0 input discard
    0 Rx pause

  • 1つまたは複数のレーンが、 関連するQSFPの電力を警告値付近で受信すると報告する場合があります。

Switch-1#show interface transceiver details

Lane Number:2 Network Lane
           SFP Detail Diagnostics Information (internal calibration)
  ----------------------------------------------------------------------------
                Current              Alarms                  Warnings
                Measurement     High        Low         High          Low
  ----------------------------------------------------------------------------
  Temperature   32.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
  Voltage        3.30 V         3.63 V      2.97 V      3.46 V        3.09 V
  Current        7.50 mA       12.00 mA     3.00 mA    12.00 mA       3.00 mA
  Tx Power      -1.47 dBm       2.99 dBm  -11.30 dBm    0.00 dBm     -7.30 dBm
  Rx Power     -0.18 dBm       2.99 dBm  -13.97 dBm   0.00 dBm     -9.91 dBm
  Transmit Fault Count = 0
  ----------------------------------------------------------------------------
  Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?