メインコンテンツまでスキップ

スイッチオーバー試行時に DR パートナーの NVLog ミラーリングがオンラインエラーになりません

Views:
51
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

のしんだ

環境

  • MetroCluster
  • ONTAP 9
  • EMSログ Sat Sep 08 00:42:34 CEST [NETAPP-21: ispfcvi2500_main1: fcvi.qlgc.sendIUError:error]: FC-VI adapter: Port 1a sendIU status = Port logged out(status code = 0x29), FCVI opcode = Connect Request(0x10), QP name = Control, QP index = 2, Remote node's system id = 1

問題

DR パートナーの NVLog ミラーリングがオフラインです。

NETAPP-1::*> metrocluster operation show
Operation: switchover-simulate
    State: failed
Start Time: 8/29/2018 06:45:06
  End Time: 8/29/2018 06:45:13
   Errors: Failed to validate the node and cluster components before the switchover operation.
NETAPP-1::NETAPP-11 (non-overridable veto): DR partner NVLog mirroring is not online. Make sure that the links between the two sites are healthy and properly configured.

NETAPP-1::*> metrocluster interconnect mirror show
              Mirror   Mirror
          Partner Admin   Oper
Node Partner Name Type   Status   Status  Adapter Type   Status
---- ------------ ------- -------- ------- ------- ------ ------
NETAPP-11   NETAPP-12 HA  enabled online
                      mlx4_0  IB    Up
                      mlx4_0  IB    Up
       NETAPP-21 DR  enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
       NETAPP-22 AUX enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
NETAPP-12   NETAPP-11 HA  enabled online
                      mlx4_0  IB    Up
                      mlx4_0  IB    Up
       NETAPP-22 DR  enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
       NETAPP-21 AUX enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
12 entries were displayed

 

EMS Logs show:

Sat Sep 08 00:42:34 CEST [NETAPP-21: ispfcvi2500_main1: fcvi.qlgc.sendIUError:error]: FC-VI adapter: Port 1a sendIU status = Port logged out(status code = 0x29), FCVI opcode = Connect Request(0x10), QP name = Control, QP index = 2, Remote node's system id = 1

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.