メインコンテンツまでスキップ

FCイニシエータアダプタポートがオフライン

環境

  • MetroCluster FC
  • ATTO FibreBridge
  • ONTAP 9

問題

  • ノードのリブート後にストレージFCイニシエータポートからFC-SASブリッジFCリンクが停止します。
  • FCイニシエータのステータスはです。 OFFLINE (hard)

slot 2: FC Host Adapter 2c (Emulex XXXXX rev. 48, <OFFLINE (hard)>)
Board name:        111-0xxxxx
Serial Number:     FC529xxxxx
Firmware rev:      11.2.219.4
Host Port Id:      N/A
FC Node Name:      2:000:0090fa:xxxxxx
FC Port Name:      1:000:0090fa:xxxxxx
Link Data Rate:    N/A
slot 2: FC Host Adapter 2d (Emulex XXXXX rev. 48,<OFFLINE (hard)>)
Board name:        111-0xxxxx
Serial Number:     FC529xxxxx
Firmware rev:      11.2.219.4
Host Port Id:      N/A
FC Node Name:      2:000:0090fa:xxxxxx
FC Port Name:      1:000:0090fa:xxxxxx
Link Data Rate:    N/A

  • [1]link-down 関連するアダプタのstorage port showレポート

Cluster_01::*> storage port show
Speed
Node               Port Type (Gb/s) State    Status
------------------ ---- ---- ------ -------- ---------------
Cluster_01
0a   SAS       0 enabled  offline
2b   FC       16 enabled  online
2c   FC        1 enabled  link-down
2d   FC        1 enabled  link-down

system health alert show
               Node: Cluster_01
           Resource: 2d
           Severity: Major
    Indication Time: Tue Dec 26 01:25:29 2023
           Suppress: false
        Acknowledge: false
     Probable Cause: FC initiator adapter 2d is at fault.
    Possible Effect: Resiliency of backend storage is compromised.
 Corrective Actions: 1. Ensure that the FC initiator link has not been tampered with.
                     2. Verify the operational status of the FC initiator
                     adapter by using the command "system node run -node
                     local -command storage show adapter".

               Node: Cluster_01
           Resource: FC_PORT_2
           Severity: Major
    Indication Time: Tue Dec 26 01:22:30 2023
           Suppress: false
        Acknowledge: false
     Probable Cause: The port "FC_PORT_2" on the bridge
                     "ATTO_X.X.X.X" is offline.

    Possible Effect: Failure of the port "FC_PORT_2" in the bridge
                     "ATTO_X.X.X.X" might cause loss of redundancy.
 Corrective Actions: 1) Check the operational status of the ports on the bridge by using the command "storage bridge show -ports".
                     2) Verify logical and physical connectivity to the port.

 

  • storage bridge show -ports コマンドでは、ブリッジポートが オフラインと表示されます

Cluster_01::*> storage bridge show -ports
     Bridge Name: ATTO_X.X.X.X
      Bridge WWN: 200000108xxxxxxx
          Vendor: Atto
           Model: FibreBridge 7500N
   Serial Number: FB7500NXXXXX
Firmware Version: 2.96 012U 125.06
   Management IP: X.X.X.X
          Errors: ATTO_X.X.X.X(200000108xxxxxxx):FC_PORT_2 is Offline.
                  ATTO_X.X.X.X(200000108xxxxxxx):Bridge is Unreachable over Management Network.
Last Update Time: 12/26/2023 01:59:49 +08:00

FC Ports:
      Admin    Oper                      Neg
Ports Status   Status  Port Mode       Speed WWPN
----- -------- ------- ------------- ------- ----------------
    1 enabled  online  n-port           16gb 210000108xxxxxxx
    2 enabled  offline unknown       unknown 220000108xxxxxxx

  • 動作しているFCイニシエータポートと不良ポートのケーブルを交換して、ケーブルとSFPを確認します。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.