メインコンテンツへスキップ

CFBIOS-54:「BIOS POST Failure」とIPMI failureが、BMCを11.9以降にアップデートした後の電源サイクル時に発生する

Views:
9
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

問題

  • 古いBIOSバージョンを実行している一部のストレージシステムで、ベースボード管理コントローラ(BMC)が最近11.9以降にアップグレードされた場合、BMCとのIPMI通信の失敗に関連して「BIOS POST Failure」エラーが発生し、ノードがブートに失敗します。
  • その後、BMCはバックアップファームウェアイメージでブートされます。
  • 次のコンソールメッセージがこの問題を示しています。

BIOS Version: 11.4
Portions Copyright (C) 2014-2018 NetApp, Inc. All Rights Reserved.
Initializing System Memory ...
Loading Device Drivers ...
Waiting for SP ...
SP failure. Resetting SP from primary FW. This can take a few minutes
Waiting for SP ...
SP failure. Resetting SP from backup FW. This can take a few minutes
Waiting for SP ...
Failed to recover SP
IPMI:Get controller FRU inventory:failed <<<<<<
Configuring Devices ...
IPMI PCI Slot Control failed. <<<<<<
...
BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT <<<<<<
LOADER-B>

 
  • BMCシステムイベントログ(SEL)には、この問題を示す次のメッセージが記録されます。

Record 314: ... [BMC.notice]: Running secondary version 11.2 <<<<<<
Record 315: ... [SysFW.notice]: SP did not respond to sync command for 332 seconds.
Record 316: ... [SysFW.notice]: Failed to recover SP
Record 317: ... [SysFW.critical]: IPMI:Get controller FRU inventory:failed <<<<<<
...
Record 320: ... [IPMI.notice]: 001a | 00 | EVT: 6fc206ff | System_FW_Status | Assertion Event, "BIOS has reset SP"
Record 321: ... [SysFW.critical]: IPMI PCI Slot Control failed. <<<<<<

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.