メインコンテンツへスキップ

スイッチクラスタ構成への移行後にクラスタネットワーク劣化アラートが発生する

Views:
2
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

環境

ONTAP 9
スイッチ経由の構成
Ciscoスイッチ

問題

  • Cisco Nexus スイッチを使用してスイッチレス構成からスイッチド構成にクラスタを移行した後、クラスタが「Cluster network health degraded.」と報告し始めました。
    • サンプルログ:
      [Node1: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected between Cluster_lif ( 169.200.00.00 ) on Node1 and Cluster_lif( 169.200.00.01 ) on Node2
  •  すべてのクラスタポート(e0a/e0b)でCRCエラーが増加:
    • IFSTAT-A ログ:

Node1
-- interface  e0a  (3 days, 4 hours, 38 minutes, 33 seconds) --
RECEIVE
Total frames:    335m | Frames/second:   1217  | Total bytes:     297g
Bytes/second:    1077k | Total errors:    103k | Errors/minute:    22
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:   131k
Non-primary u/c:    0  | CRC errors:     103k | Runt frames:      0

-- interface  e0b  (3 days, 4 hours, 35 minutes, 54 seconds) --
RECEIVE
Total frames:    303m | Frames/second:   1101  | Total bytes:     281g
Bytes/second:    1022k | Total errors:   16766  | Errors/minute:     4
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:   130k
Non-primary u/c:    0  | CRC errors:    16766  | Runt frames:      0

Node2
-- interface  e0a  (24 days, 10 hours, 42 minutes, 32 seconds) --
RECEIVE
Total frames:    1535m | Frames/second:    727  | Total bytes:    4771g
Bytes/second:    2259k | Total errors:   72359  | Errors/minute:     2
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:   290k
Non-primary u/c:    0  | CRC errors:    72359 | Runt frames:      0

-- interface  e0b  (24 days, 10 hours, 42 minutes, 32 seconds) --
RECEIVE
Total frames:    1581m | Frames/second:    749  | Total bytes:    4771g
Bytes/second:    2259k | Total errors:   17776  | Errors/minute:     1
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:   291k
Non-primary u/c:    0  | CRC errors:    17776 | Runt frames:      0

  • クラスタ接続に使用されるスイッチポート(ブレークアウトポート)では、入力エラーと出力エラーの両方が表示されます。
  • クラスタスイッチのログには、ブレークアウトポート(例:Ethernet1/1/1、1/1/2、1/1/3、1/1/4)が表示されますが、設定が欠落しています。
  • RCFバナーとポートチャネルの説明がRCFファイルと一致しませんでした。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.