メインコンテンツへスキップ

システムヘルスアラートレポート - メンテナンス中の SwitchSSHAccess_Alert

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

環境

  • ONTAP 9
  • クラスタネットワークスイッチのメンテナンス
  • ONTAPアップグレード

問題

  • メンテナンスアクティビティ後の ONTAP のクラスタネットワークスイッチレポート SwitchSSHAccess_Alert

::> system health alert show
Node: Node-1
Alert ID: SwitchSSHAccess_Alert
Resource: Switch1
Severity: Minor
Indication Time: Wed Apr 10 10:26:33 2024
Suppress: false
Acknowledge: false
Probable Cause: Login failed to Ethernet switch. Cannot collect tech-support logs.
Possible Effect: Ethernet switch tech-support logs are not available in AutoSupport(R) messages for troubleshooting.
Corrective Actions: 1) To set up public SSH key authentication on the Ethernet switch, run the "system switch ethernet log setup-password" command.
ONTAP(R) software requires one-time use of the Ethernet switch's administrative login credentials to set up the public SSH key for ONTAP access.
The administrative credentials will be discarded after the setup command is complete.
2) If public SSH key authentication is already configured, log in to the Ethernet switch with administrative credentials from an SSH host or serial console to investigate the login failures.
3) To disable tech-support log collection, run the "system switch ethernet log disable-collection"

  • アラートの概要にも次の情報が表示されます。
     Probable Cause: SSH access to the Ethernet failed. ONTAP cannot collect switch logs. Possible Effect: Ethernet switch logs are not available, especially via AutoSupport messages for troubleshooting. Corrective Actions: 1) Ensure that the provided credentials are valid for accessing the switch and that SSH connectivity to the switch is possible from the node running cshmd.
  • スイッチのヘルスが低下する原因は次のとおりです。
::>system health subsystem show
 
Subsystem Health
----------------- ------------------
SAS-connect     ok
Environment     ok
Memory       ok
Service-Processor ok
Switch-Health    degraded
CIFS-NDO      ok
Motherboard     ok
IO         ok
MetroCluster    ok
MetroCluster_Node ok
FHM-Switch     ok
FHM-Bridge     ok
SAS-connect_Cluster ok

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.