メインコンテンツまでスキップ

DS460C ドロワーコントロールモジュール( DCM )の障害

Views:
103
Visibility:
Public
Votes:
0
Category:
disk-shelves<a>DS460C</a><a>ドロワー</a><a>2008443218</a>
Specialty:
hw
Last Updated:

環境

DS460Cディスクシェルフ

問題

  • イベントメッセージエラー:

monitor.shelf.fault: Critical fault reported on disk storage shelf attached to channel 0b. Check fans, power
supplies, disks, and temperature sensors.

  • DS460Cで、のいずれかのDCM要素から重大な障害が報告されてい STORAGE-FAULTます。
DCM installed element list: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10; with error: 1
DCM information by element:
[1] Serial number: XXXXXXXXXXXXX  Part number: XXXXXXXXXXXXX
Type: XXXXXXXXX  Vendor: XXXXXXXXX  Firmware version: 00000647
 
Shelf Type: DS460-12
Product Serial Number: 0XXXXXXXXX
Module Type: IOM12
Enclosure:
Element Status         Status Bytes Status Descriptions
1: OK                01,00,02,00  FAIL        
Drawers Control Module:
Element Status                 Status Bytes  Status Descriptions
1 [IOM12 A]    : CRITICAL          02,00,01,00   REPORT     
2 [IOM12 A]    : OK                01,00,01,00   REPORT
...
  • シェルフは SHELF OVER TEMPERATURE 、DCMの障害と同時に、またはその他の温度警告アラートを断続的に報告することもできます。

Sat May 20 01:08:37 +0900 [Nodename-01: dsa_worker4: ses.status.temperatureWarning:alert]: DS460-12 (S/N SHxxxxxxxxx000xx) shelf 20 on channel 1a temperature warning for Temperature sensor 21: not installed or failed. Current temperature: 33 C (91 F). This module is on the front of the shelf 1st drawer from the top, module B sensor 2.

Sat May 20 01:08:37 +0900 [Nodename-01: dsa_worker4: ses.status.temperatureWarning:alert]: DS460-12 (S/N SHxxxxxxxxx000xx) shelf 20 on channel 1a temperature warning for Temperature sensor 26: not installed or failed. Current temperature: 35 C (95 F). This module is on the front of the shelf 4th drawer from the top, module B sensor 1. 

  • 次のエラーが表示されることもあります。
12/23/2022 08:34:15 Nodename-01 ALERT    callhome.hostport.disable: Call home for HOST_PORT_FAIL - Disabled by IOM
12/23/2022 08:34:15 Nodename-01 ALERT    ds.sas.hostphy.disableErr: Port [DCM2-1] on channels 0c shelf ID 20 IOM B disabled due to excessive phy changes.     

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?