アップグレード中、 AFF-A400 ではポート e3a / e3b で netif.sfpNotSupported と表示されます
環境
- ONTAP 9.7P14以前のパッチ リリース
- AFF-A400
- 100G Ethernet Controller Ionic(X1151)(1.0.1-E-31~1.0.1-E-39 ファームウェア)
問題
ONTAPのアップグレード中、 更新されたノードのクラスタポートe3aとe3bが停止していると、HAパートナーノードがギブバック待機状態になります。
- アップグレードされたノードのEMSでSFP+/ QSFP+サポート対象外のメッセージが報告される。
netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported ) installed in e3a is not supported with this network interface.
netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported ) installed in e3b is not supported with this network interface.
- アップグレード後のノードでポートが停止と表示される
::> system node run -node updated_node -command sysconfig -a
slot 3: Dual 100G Ethernet Controller IONIC
e3a MAC Address: 00:ae:cd:09:b5:50 (auto-unknown-down)
...
e3b MAC Address: 00:ae:cd:09:b5:51 (auto-unknown-down)
...
Device Type: ionic
Firmware Version: 1.4.0-E-96
Serial Number: FPN0123456A
- アップグレードされていないノードでポートが稼働している
::> system node run -node not_updated_node -command sysconfig -a
例:
slot 3: 100G Ethernet Controller IONIC
e3a MAC Address: 00:ae:cd:09:c0:30 (auto-100g_cr4-fd-up)
...
e3b MAC Address: 00:ae:cd:09:c0:31 (auto-100g_cr4-fd-up)
...
Device Type: ionic
Firmware Version: 1.0.1-E-31
Serial Number: FPN0123456B
- アップグレードされていないノードからのEMSでリンクエラーが報告される:
::> event log show -event **NotSupported*
Tue Aug 03 16:06:15 +0300 [not_updated_node: kernel: netif.linkInfo:info]: Ethernet adapter e3b: Link Reset in progress.
Tue Aug 03 16:25:10 +0300 [not_updated_node: kernel: netif.linkInfo:info]: Ethernet adapter e3a: Link Reset in progress.
- ケーブル接続が検証され、 Hardware Universeごとにサポートされていることが確認
- 2 ノードスイッチレスクラスタのクラスタポートループバックテストの実行方法 停止したノードでループバックテストが失敗する