メインコンテンツまでスキップ

Cisco スイッチに接続されたイーサネットポートがリブート直後にオンラインにならない

Views:
169
Visibility:
Public
Votes:
0
Category:
aff-series<a>2008976876</a>
Specialty:
hw
Last Updated:

環境

  • AFF-A400
  • FAS8300
  • ONTAP 9
  • Cisco Nexus 9000シリーズスイッチ

問題

  • ポート e0e から E0h へのリンクアップ遅延はリブート後に発生します。
  • 問題は、ポート e0e と E0h 間でランダムに認識される。

         slot 0: 10G/25G Ethernet Controller CX5-Mezz
                        e0e MAC Address:    XX:XX:XX:XX:XX:XX (auto-10g_sr-fd-up)
                            SFP Vendor:         FINISAR CORP.
                            SFP Part Number:    FTLX8574D3BCL
                            SFP Serial Number:  XXXXXXX
                        e0f MAC Address:    XX:XX:XX:XX:XX:XX (auto-unknown-fd-down)
                            SFP Vendor:         FINISAR CORP.
                            SFP Part Number:    FTLX8574D3BCL
                            SFP Serial Number:  XXXXXXX
                        Device Type:        CX5 PSID(NAP0000000007)
                        Firmware Version:   16.26.4012
            slot 0: 10G/25G Ethernet Controller CX5-Mezz
                        e0g MAC Address:    XX:XX:XX:XX:XX:XX (auto-10g_sr-fd-up)
                            SFP Vendor:         FINISAR CORP.
                            SFP Part Number:    FTLX8574D3BCL
                            SFP Serial Number:  XXXXXXX
                        e0h MAC Address:    XX:XX:XX:XX:XX:XX (auto-unknown-fd-down)
                            SFP Vendor:         FINISAR CORP.
                            SFP Part Number:    FTLX8574D3BCL
                            SFP Serial Number:  XXXXXXX
                        Device Type:        CX5 PSID(NAP0000000007)
                        Firmware Version:   16.26.4012

  • ケーブルを接続し直したあと、ポートが起動する。
  • Cisco スイッチでは 10G SR SFP が使用されます。

        show int transceiver detail Cisco ログの場合:

Ethernet1/1
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-ACCELINK
    part number is RTXM228-551-C98
    revision is 1.0
    serial number is XXXXXXXXXXX
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 62.5/125um fiber is 26 m
    Link length supported for 50/125um OM3 fiber is 300 m
    cisco id is 3
    cisco extended id number is 4
    cisco part number is 10-2415-03
    cisco product id is SFP-10G-SR
    cisco version id is V03

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.