メインコンテンツまでスキップ

FAS8300 NodeIfInErrorsWarnAlertを受信

Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009633199</a>
Last Updated:

環境

  • FAS8300
  • ONTAP 9
  • Cisco Nexus 3132Q - V

問題

  • NodeIfInErrorsWarnAlert とのクラスタアラートはEMSログファイルに表示されます。
[vifmgr: vifmgr.cluscheck.ctdpktloss:alert]: Continued packet loss when pinging from cluster lif lif-name (node01) to cluster lif lif-name (node02).
 
Call home for CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected between Cluster01 (IP ADD) on Node01 and Cluster02 (IP ADD) on Node02
 
  •  system-health-alert.xmlには、次の情報も表示されます。

The percentage of inbound packet errors of node "Node01" on interface "xxx" is above the warning threshold.
 

  • クラスタポートとスイッチログを確認して、接続されているポートを特定します。

CLUSTER01::> network port show
Node: NODE01
                      Speed(Mbps)     Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- ---------
xxx    Default    Default      up  9000  auto/-    healthy

  • スイッチログにスイッチ側のMTUサイズが正しく設定されていないことが表示される
Ethernetx/x is up
admin state is up, Dedicated Interface
  Hardware: 40000 Ethernet, address: xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx)
 MTU 1500 bytes, BW 40000000 Kbit , DLY 10 usec

 

  • ifstat -z 影響を受けるノードで実行されている場合は、関連するポートでCRCエラーが高くなっていることを確認します。

-- interface  xxx  
RECEIVE
Total frames:    468m | Frames/second:    227  | Total bytes:     114g
Bytes/second:   55454  | Total errors:    556k | Errors/minute:    16
Total discards:    0  | Discards/minute:    0  | Multi/broadcast:  2369k
Non-primary u/c:    0  | Errored frames:    0  | Unsupported Op:    0
CRC errors:     556k | Runt frames:      0  | Fragment:       0

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?