交換後、IOMのエンクロージャに「not installed」と表示されます
環境
- ONTAP 9
- AFF A300
- DS224Cディスク シェルフ
- IOM12モジュール
問題
- IOM12モジュールに障害があることが検出されました
- モジュールが交換されました
- IOMモジュールのステータスが「not installed」と表示される。
node1> storage show fault -vEnclosure Status: criticalChannel: 0dShelf: 10Shelf Type: DS224-12Product Serial Number: 021919025151Module Type: IOM12Enclosure Electronics:Element Status Status Bytes Status Descriptions1 [IOM12 A] : OK 01,00,01,00 REPORT2: NOT INSTALLED 05,00,00,00Enclosure:Element Status Status Bytes Status Descriptions1: OK 01,00,02,00 FAILVendor Unique Element 83-IOM12: (SAS)Element Status Status Bytes Status Descriptions1 [IOM12 A] : OK 01,08,00,20 MASTER, RESERVED2: NOT INSTALLED 05,00,00,00Vendor Unique Element 85-IOM12: (ACP)Element Status Status Bytes Status Descriptions1 [IOM12 A] : CRITICAL 02,18,00,40 NO ACPP, INBACP, FAIL2 : NOT INSTALLED 05,18,00,00sysconfig -a出力にモジュールが表示されません
Cluster::> run -node node1 sysconfig -aslot 0: SAS Host Adapter 0d (PMC-Sierra PM8072 rev. C, SAS, <UP>)
Firmware rev: 03.08.09.00
Base WWN: 5:00xxxx:00xxxxx:xx
Temperature: Not Available
Phy State: [4] Enabled, 12.0 Gb/s
[5] Enabled, 12.0 Gb/s
[6] Enabled, 12.0 Gb/s
[7] Enabled, 12.0 Gb/s
Mini-SAS HD Vendor: Molex Inc.
Mini-SAS HD Part Number: 112-00437+A0
Mini-SAS HD Type: Passive Copper (unequalized) 2m ID:01
Mini-SAS HD Serial Number: 11963138710.0 : NETAPP X371_SLBPE960ATE NA50 915.4GB 520B/sect
..
10.23: NETAPP X371_SLBPE960ATE NA50 915.4GB 520B/sect
Shelf 10: DS224-12 Firmware rev. IOM12 A: 0281 B: ----