メインコンテンツへスキップ

イーサネットポートでJabberエラーが発生しました

Views:
67
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS / AFF システム
  • ONTAP 9

問題

  • 物理ポートまたは論理ポートのハードウェアエラーがEMSで報告されます。

[Node-01: vifmgr: vifmgr.cluscheck.hwerrors:alert]: Port e2a on node Node-01 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped).
[Node-01: vifmgr: vifmgr.cluscheck.hwerrors:alert]: Port e2c on node Node-01 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped).
[Node-01: vifmgr: vifmgr.cluscheck.hwerrors:alert]: Port a0a on node Node-01 is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped).

  • ONTAP でエラーが発生している場合は、ifstatの出力にJabber errorsが表示されます。
-- interface e2a (104 days, 14 hours, 16 minutes, 20 seconds) -- RECEIVE Total frames: 2233m | Frames/second: 247 | Total bytes: 571g Bytes/second: 63198 | Total errors: 11352k | Errors/minute: 75 Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 1962m Non-primary u/c: 0 | Errored frames: 0 | Unsupported Op: 0 CRC errors: 0 | Runt frames: 0 | Fragment: 0 Long frames: 4601 | Jabber: 11347k | Length errors: 0

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.