メインコンテンツへスキップ

ノードレポートsplog.sp.not.accessible、ファイアウォールブロッキングポート50000(SP APIサービス用)

Views:
49
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
HW
Last Updated:

問題

  • 1 つのノードが、クラスター内の他のノードのSP/ BMCに servprocd 接続の問題を報告しています。例: 

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_01) is not accessible because of The Service Processor on node "node_name_01" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_02) is not accessible because of The Service Processor on node "node_name_02" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

  • これらのメッセージは、 ONTAPまたはSP/ BMCファームウェアの更新後、
  • servprocdデーモンとapi-serviceがノード
  • HW-Assistで再起動され、ノードのmagnamente LIFとBMC IP間のpingテストが正常になった

     

    Sign in to view the entire content of this KB article.

    New to NetApp?

    Learn more about our award-winning Support

    NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.