メインコンテンツへスキップ

ONTAP LUN SCSI IOがハングしました

Views:
Visibility:
Internal
Votes:
0
Category:
aff-series<a>2009476725</a>
Specialty:
san
Last Updated:

環境

  • ONTAP FC / FCoE
  • FlexPod
  • VMware ESXi 7.0 Update 2
    • ドライバーnfnicバージョン4.0.0.63-1vmw.702.0.0.17867351
  • Cisco UCS

問題

VMwareレイヤおよびCisco UCSサーバVICインターフェイスでLUNアクセスが失われ、SCSI IOが中止されます
 
例:
VMwareログ:
NMP: nmp_ThrottleLogForDevice:: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. Act:NONE. cmdId.initiator=0x4538c9a1bbd8 CmdSN 0x0
VMW_SATP_ALUA: satp_alua_issueCommandOnPath:706: Path (vmhba0:C0:T1:L0) command 0xa3 failed with transient error status Transient storage condition, suggest retry. sense data: 0x6 0x29 0x0. Waiting for 20 seconds


Ciscoログ:
ecom.ecom_main ecom(8:1): abort called for host 1 for exch 44a4, status 3 rx_id 0 s_stat 0x0 xmit_recvd 0x0 burst_offset 0x0 sgl_err 0x0
last_param 0x0 last_seq_cnt 0x0  tot_bytes_exp 0x4000 h_seq_cnt 0x0  exch_type 0x1 s_id 0x40086 d_id 0x40141 host_tag 0xf2 tm_req
0x2 age 180 scsi_opcode 8a wq 39 mss 800

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange