メインコンテンツへスキップ

PHYがSASアダプタでRate Unknownを報告する

Views:
47
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

環境

  • ONTAP 9
  • FASシステム
  • AFFシステム

問題

  • PHYがSASアダプタでRate Unknownを報告する:

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8072 rev. C, SAS, <UP>)
            Firmware rev:       03.08.09.00
            Base WWN:           5:00a098:003b627:a0
            Phy State:         [12] Enabled, Rate unknown
                                [13] Enabled, 12.0 Gb/s
                                [14] Enabled, 12.0 Gb/s
                                [15] Enabled, 12.0 Gb/s
            Mini-SAS HD Vendor:        MOLEX

slot 0: SAS Host Adapter 0b (PMC-Sierra PM8072 rev. C, SAS, <UP>)
Firmware rev:     03.08.09.00
Base WWN:       5:00a098:003b3f3:74
Phy State:       [8] Enabled, 12.0 Gb/s
           [9] Enabled, 12.0 Gb/s
           [10] Disabled
           [11] Disabled
      Mini-SAS HD Vendor:     MOLEX

  • sas-expander-phy-stateログにRate unknownと表示される。

SAS-EXPANDER-PHY-STATE
Expander phy state on 0b.10 (NETAPP  :DS22412IOM12A   SHFNC2024000199):
                Pwr      Invald Disprt Loss   Phy   CRC   Phy
              Pwr Ccl Rsv Rls DWord  Error  Sync   Reset  Error  Change SATA
PHY/BAY STATE       ON  Cnt Cnt Cnt Count  Count  Count  Prob   Cnt   Cnt   Affiliation
------- ----------------- --- --- --- --- ------ ------ ------ ------ ------ ------ ----------------
 0/P0:0 12.0 Gb/s      --- --- --- --- 0    0    0    0    0    3    ----------------
 1/P0:1 12.0 Gb/s      --- --- --- --- 0    0    0    0    0    3    ----------------
 2/P0:2 12.0 Gb/s      --- --- --- --- 0    0    0    0    0    3    ----------------
 3/P0:3 12.0 Gb/s      --- --- --- --- 0    0    0    0    0    3    ----------------
 8/P2:0 Rate unknown   
 9/P2:1 Rate unknown 

  • sas-adapter-stateログがdegradedと表示される

SAS-ADAPTER-STATE
State for adapter channel 0b: UP (degraded)
Invald Disprt Loss   Phy   Phy   
DWord  Error  Sync   Reset Change 
PHY STATE        Count  Count  Count  Prob   Count  
-------------------------------------------------------- 
8 12.0 Gb/s      0    0    0    0    11   
9 12.0 Gb/s      0    0    0    0    11   
10 Disabled      0    0    0    0    12   
11 Disabled      0    0    0    0    12

  • EMSログ:

[sas.cable.degraded:error]: Cable attached to SAS port "1d" is functioning in a degraded mode.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.