メインコンテンツまでスキップ

ONTAPのアップグレード後にポートe0dが停止

Views:
4
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009922787</a>
Last Updated:

環境

  • AFF / FAS / ASA
  • ONTAP 9
  • ONTAP のアップグレード

問題

  • ONTAPのアップグレード後、e0dは停止し、e0cは稼働していますが、QSFPの詳細は表示されません。

|| ONTAPのアップグレード前||

slot 0: Dual 40G/100G Ethernet Controller CX5
e0c MAC Address:   d0:xx:xx:xx:xx:xb (auto-100g_sr4-fd-up)
e0d MAC Address:   d0:xx:xx:xx:xx:xc (auto-100g_sr4-fd-up)
|| ONATPアップグレード後||
 
slot 0: Dual 40G/100G Ethernet Controller CX5
e0c MAC Address:   d0:xx:xx:xx:xx:xb (auto-100g_sr4-fd-up)
e0d MAC Address:   d0:xx:xx:xx:xx:xc (auto-unknown-fd-down)
  • DMESGログ:
[1389] e0d: WARN: wait_func:993:(pid 31917): ACCESS_REG(0x805) timeout. Will cause a leak of a command resource
[1389] e0d: WARN: mlx5_fwdump:191:(pid 31917): Issuing FW dump
[1390] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5e_ioctl:4734:(pid 31917): Query eeprom failed, eeprom reading is not supported
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_Q_COUNTER(0x773) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_VPORT_COUNTER(0x770) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): ACCESS_REG(0x805) op_mod(0x1) failed, status bad operation(0x2), syndrome (0x3590f5)
[1664] e0c: WARN: wait_func:993:(pid 37921): ACCESS_REG(0x805) timeout. Will cause a leak of a command resource
[1664] e0c: WARN: mlx5_fwdump:191:(pid 37921): Issuing FW dump
[1664] e0c: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1665] e0c: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad operation(0x2), syndrome (0x3590f5)
[1666] e0c: ERR: mlx5e_ioctl:4734:(pid 37921): Query eeprom failed, eeprom reading is not supported
 
[102] e0c: Unable to read the eeprom info error = 0xffffffc4
[104] e0d: WARN: mlx5_fwdump:191:(pid 0): Issuing FW dump
[105] Jan 23 04:13:02 [scc143n08a:net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0c has transitioned to the active state.
[106] e0d: Unable to read the eeprom info error = 0xffffffc4
 
  • ケーブルとSFPを抜き差ししても問題は解決しなかった。
  • 影響を受けるポートをバウンスしようとしますが、問題は同じままです。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?