メインコンテンツへスキップ

(SPARES_LOW)エラー - AutoSupport メッセージ

Views:
655
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

ONTAP 9

イベント サマリ

callhome.sparesイベント 

このメッセージは、ディスク ドライブ障害が発生した場合に備えて、1つ以上のRAIDグループで利用可能な適切なスペア ディスク ドライブがない場合に発生します。 

  • 対象となるスペア ディスク ドライブは、正しいサイズと容量であり、適切なプールにある必要があります。
    • SPARES_LOWは、 options raid.min_spare_countパラメータによって制御されます。デフォルト値は 1です。
    • ディスクドライブが故障し、再構築用のスペア ディスクがない場合、システムはデグレード モードに入ります。

 「デグレード」 の定義は、アグリゲートで使用されるRAIDグループの種類によって異なります:

  • raid4  - RAIDグループで1台のディスクが欠落または障害状態にある
  • raid-dp  - RAIDグループで2台のディスクが欠落または障害状態にある
  • raid-tec  - RAIDグループで3台のディスクが欠落または障害状態にある
  • ミラーされたアグリゲートは、アグリゲートの両方のプレックスで同じ位置のRAIDグループにディスクの欠落または障害が発生した場合、 「デグレード」 とみなされます。
  • ONTAP 9.12.1より前のバージョンでは、定義されたタイムアウト間隔の間、完全にデグレード モードで実行されると、RAIDグループの整合性障害とデータ損失の可能性を防ぐためにシステムが自動的に停止します。
    • デフォルトのタイムアウトは24時間です。
  • システムがデグレード モードで実行されている間にスペア ドライブが使用可能になると、システムはただちに障害ドライブのリビルドを開始します。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.