メインコンテンツまでスキップ

ONTAP のアップグレード時にブートデバイスがパニック状態になる可能性があり

Views:
38
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009467130</a>
Specialty:
HW
Last Updated:

環境

ONTAP 9

問題

  • ONTAP のアップグレード時にブートデバイスがパニック状態になる可能性があり
g_vfs_done():ada0s1[READ(offset=5151678464, length=8192)]error = 5

g_vfs_done():g_vfs_done():md0.uzip[READ(offset=870875136, length=8192)]ada0s1[WRITE(offset=14316814336, length=8192)]error = 5

PANIC  : g_vfs_done(): rootfs.uzip read error - suspect boot device

version: 9.8P3: Sat Mar 27 04:59:49 EDT 2021

conf   : x86_64.optimize

cpuid = 16

KDB: stack backtrace:

vpanic() at vpanic+0x70d/frame 0xfffffe00292801f0

panic() at panic+0x43/frame 0xfffffe0029280250

g_vfs_strategy() at g_vfs_strategy+0x4f5/frame 0xfffffe0029280290

g_io_schedule_up() at g_io_schedule_up+0x38/frame 0xfffffe00292802d0

g_init() at g_init+0x49d/frame 0xfffffe00292802e0

fork_exit() at fork_exit+0xc7/frame 0xfffffe0029280330

fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0029280330

--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

Uptime: 439d8h47m9s

ahcich2: AHCI reset done: devices=00000001

(ada0:ahcich2:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00

(ada0:ahcich2:0:0:0): CAM status: ATA Status Error

(ada0:ahcich2:0:0:0): ATA status: 71 (DRDY DF SERV ERR), error: 40 (UNC )

(ada0:ahcich2:0:0:0): RES: 71 40 00 00 00 60 00 00 00 00 00

(ada0:ahcich2:0:0:0): Error 5, Retries exhausted

(ada0:ahcich2:0:0:0): Synchronize cache failed



PANIC: g_vfs_done(): rootfs.uzip read error - suspect boot device in process g_up on release 9.8P3 (C) on Thu Feb  9 00:16:12 +08 2023

version: 9.8P3: Sat Mar 27 04:59:49 EDT 2021

compile flags: x86_64.optimize

HA: current time (in sk_msecs) 37961080281 (in sk_cycles) 83319632652664200

DUMPCORE: START

Dumping to boot device.



(ada0:ahcich2:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 00 00 00 00 00 00

(ada0:ahcich2:0:0:0): CAM status: ATA Status Error

(ada0:ahcich2:0:0:0): ATA status: 71 (DRDY DF SERV ERR), error: 40 (UNC )

(ada0:ahcich2:0:0:0): RES: 71 40 00 00 00 60 00 00 00 00 00

(ada0:ahcich2:0:0:0): Retrying command, 0 more tries remain

(ada0:ahcich2:0:0:0): READ_DMA. ACB: c8 00 00 ff ff 43 00 00 00 00 08 00

(ada0:ahcich2:0:0:0): CAM status: Unconditionally Re-queue Request

(ada0:ahcich2:0:0:0): Error 5, Retry was blocked

Aborting dump due to I/O error.

(aprobe0:ahcich2:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00

(aprobe0:ahcich2:0:0:0): CAM status: ATA Status Error

(aprobe0:ahcich2:0:0:0): ATA status: 71 (DRDY DF SERV ERR), error: 40 (UNC )

(aprobe0:ahcich2:0:0:0): RES: 71 40 00 00 00 60 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): Retrying command, 0 more tries remain

(ada0:ahcich2:0:0:0): WRITE_DMA. ACB: ca 00 00 ff ff 43 00 00 00 00 08 00

(ada0:ahcich2:0:0:0): CAM status: Unconditionally Re-queue Request

(ada0:ahcich2:0:0:0): Error 5, Retry was blocked

Aborting dump due to I/O error.

coredump: Error. Unable to read NoSaveCore partition header (5)

coredump: Using offset 0 for the coredump.

(aprobe0:ahcich2:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00

(aprobe0:ahcich2:0:0:0): CAM status: ATA Status Error

(aprobe0:ahcich2:0:0:0): ATA status: 71 (DRDY DF SERV ERR), error: 40 (UNC )

(aprobe0:ahcich2:0:0:0): RES: 71 40 00 00 00 60 00 00 00 00 00

(aprobe0:ahcich2:0:0:0): Error 5, Retries exhausted

(ada0:ahcich2:0:0:0): WRITE_DMA. ACB: ca 00 00 ff ff 43 00 00 00 00 08 00

(ada0:ahcich2:0:0:0): CAM status: Unconditionally Re-queue Request

(ada0:ahcich2:0:0:0): Error 5, Periph was invalidated

Aborting dump due to I/O error.

coredump: error: failed to write first header: 'coredump error'

coredump: error: dump_sparecore_init() failed, ''. A coredump will not be available at this time.
  • LOADERでブートできません

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.