メインコンテンツまでスキップ

システムDIMM構成はFAS8300ではサポートされていません

Views:
14
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

環境

  • FAS8300
  • ONTAP 9

問題

  • ONTAPのアップグレード後の1つのノードのブート障害。
  • 影響を受けるノードの初回ブート:

Setting default boot image to image1...

done.

Uptime: 85d19h9m54s

HALT:  HA partner has taken over (ic) on Sat May 20 09:30:00 CST 2023

 

HBIOS Version: 16.7

PEI start.

CPU PEI initialization.

Wait BMC self-test result.

BMC self-test: OK.

UPI initialization.

CPU initialization.

Running full memory initialization.

MEMORY WARNING: Major Code 0x30 Minor Code 0x2d DIMM:H0
DIMM:H0 mapped out. BIOS MRC mapped out DIMM. Major Code 0x0a Minor Code 0x03
DIMM:H0 mapped out. BIOS MRC mapped out DIMM. Major Code 0x0b Minor Code 0x1c


SPI FLASH: Primary BIOS

PEI end.

DXE start.

USB initialization.

PCI host bridge initialization.

CSM initialization.

PCI Bus initialization start.

BDS start.

Console output devices connect.

 

  • 電源再投入後に正常に起動した場合:

*******************************

*                             *

* Press Ctrl-C for Boot Menu. *

*                             *

*******************************

cryptomod_fips: Executing Crypto FIPS Self Tests.

cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.

cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.

cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.

cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.

cryptomod_fips: Crypto FIPS self-test: 'AES-128 CCM' passed.

cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.

cryptomod_fips: Crypto FIPS self-test: 'KDF' passed.

cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.

cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.

cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.

cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.

cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.

Running the upgrade system

bootarg.upgrade="true"

bootarg.from.version="9.9.1P12"

bootarg.to.version="9.9.1P15"

System DIMM configuration is not supported by FAS8300

Halting...

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.