メインコンテンツへスキップ

X425_HCBEP1T2A10 NA02ドライブで、メディアエラーが原因でWAFL の不整合が発生します

Views:
6
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009466479</a>
Specialty:
hw
Last Updated:

環境

  • ファームウェアNA02を実行しているX425_HCBEP1T2A10をドライブします
  • WAFL ユーザデータに整合性がありません

問題

  • 複数のディスク上の回復されていないメディアエラー
  • RAID にストライプの再構築に関する問題がある(交換したディスクからの再構築)

[node-1: raidio_thread: raid_multierr_bad_block_1:error]: params: {'disk_rpm': '10000', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA02', 'shelf': '8', 'disk_info': 'Disk /aggr1/plex0/rg1/0a.08.10 Shelf 8 Bay 10 [NETAPP   X425_STBTE1T2A10 NA02] S/N [S400N81D] UID [5000C500:8EEE68FF:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000]', 'volumeBno': '6821648768', 'site': 'Local', 'bay': '10', 'carrier': '', 'serialno': 'S400N81D', 'owner': '', 'model': 'X425_STBTE1T2A10', 'disk_type': '4', 'blockNum': '95604672'}

  • WAFL 不整合エラーが報告されました

[node-1: wafl_exempt04: wafl.raid.incons.userdata:error]: WAFL inconsistent: inconsistent user data block at VBN 6821648817 (vvbn:1229547078 fbn:691408 level:0) in public inode (fileid:5488 snapid:0 file_type:1 disk_flags:0x8002 error:120 raid_set:1) in volume vol1@vserver:f6a2ca13-c7fa-11e4-b338-00a123456789.
[node-1: wafl_exempt04: wafl.incons.userdata.vol:alert]: WAFL inconsistent: volume vol1@vserver:f6a2ca13-c7fa-11e4-b338-00a123456789 has an inconsistent user data block. Note: Any new Snapshot copies might contain this inconsistency.

  • システムのドライブの寿命は 6 年以上です

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.