メインコンテンツまでスキップ

FAS2650 パニックリブート

Views:
255
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

に適用されます

FAS2650

問題

FS2650 はパニック状態で再起動します。
 
PANIC : PCI Error NMI from device(s):RPT(0,1,0):PLX PCIE 8725 switch on Controller.
version: 9.3: Thu Jan 4 03:00:09 PST 2018
conf : x86_64.optimize
cpuid = 3
Uptime: 1064d21h2m38s
fpudna: fpcurthread == curthread
 
PANIC: PCI Error NMI from device(s):RPT(0,1,0):PLX PCIE 8725 switch on Controller. in process idle: cpu3 on release 9.3 (C) on Tue Feb 9 17:01:40 JST 2021
version: 9.3: Thu Jan 4 03:00:09 PST 2018
compile flags: x86_64.optimize
HA: current time (in sk_msecs) 92005240804 (in sk_cycles) 174404934374763539
DUMPCORE: START
Dumping to disks: 0b.00.23P1
...........................................................................................................................................................................................................................................................................................
..........................................................................................................................
DUMPCORE: END -- coredump written
coredump: compression ms 39164 compressions 12624 bytes in 34107015168 bytes out 8665915679 ratio 393%
comp BW 830MB/s
coredump: write ms 50496 write count 2258 write bytes 8666017792 write BW 163MB/s
coredump: total ms 150138 chunks of all zeroes 383
System rebooting...
 
sysconfig -a に ERRORMOD が表示されている Flash Cache NVMe ファームウェアバージョンです
 
slot 1: Flash Cache NVMe
Serial Number: XXXXXXXXXXXXXX
Part Number: XXX-XXXXX
Hardware Revision: A0
Firmware Version: ERRORMOD
Model Name: X3310A
Capacity: 512 GB
Vendor Name: Samsung
State: ok

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.