メインコンテンツまでスキップ

クラスタサービスはシステムの起動後に異常が発生しています

Views:
129
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core<a>2009088486</a><a>(翻訳用</a>
Last Updated:

環境

  • すべてのAFF およびFAS プラットフォーム
  • ONTAP
  • 電源の停止、コントローラの再配置、またはアップグレードやその他のリブート時

問題

  • ノード間のクラスタ通信が異常で、各ノードのaggr statusのみが表示されます

Node02
Aggregate    Size Available Used% State   #Vols  Nodes       RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_fas_cluster_01 -    -    - unknown    - node01   -
aggr0_fas_cluster_02 7.60TB 377.4GB 95% online  1 node02   raid_dp,
                                  normal
aggr1       -      -    - unknown    - node01   -
aggr2    176.1TB   5.01TB   97% online    19 node02   raid_tec,
                                  normal

Node01
Aggregate    Size Available Used% State   #Vols  Nodes       RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_fas_cluster_01 
7.60TB   377.4GB   95% online          1 node01   raid_dp,
aggr0_fas_cluster_02  -    -    - unknown    - node02   -
aggr1       -      -    - unknown    - node01   -
aggr2       -      -    - unknown    - node02   -

  • Node1でclusterコマンドに失敗しました

::> cluster show

Error: "show" is not a recognized command

::> set advanced

::*> cluster ring show

Error: "show" is not a recognized command

  • A値がに記載されている場合は、ローダーをチェックインします corrupt

LOADER-A> printenv

Variable Name     Value
-------------------- --------------------------------------------------
ARCH          X86_64
AUTOBOOT        true
AUTOBOOT_FROM     PRIMARY
AUTO_FW_UPDATE     true
BACKUP_BIOS_VERSION  11.5
BIOS_DATE       Wed 02/27/2019
BIOS_INTERFACE     C3
BIOS_VERSION      11.5
BOARDNAME       SB_XXII
bootarg.cloud_optimized false
bootarg.frurom.fileid 538125770
bootarg.init.boot_clustered true
bootarg.init.dhclient.disable true
bootarg.init.switchless_cluster.enable 1
bootarg.init.trace_on_panic true
bootarg.kcs.clam.partnerState gb
bootarg.kcs.clam.quorumEpoch 110
bootarg.kcs.enable.chaaq? true
bootarg.keymanager.support true
bootarg.mgwd.scsi_blade_uuid ed80f948-0d64-11ea-a385-00a0984f2530
bootarg.nameservices.ypbind true
bootarg.nscache.enabled true
bootarg.nv2flash.discard.nvdata true
bootarg.pci_config_init.done true
bootarg.rdb_corrupt  5550055000
bootarg.setup.ngsh_debug true

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.