メインコンテンツまでスキップ

power off trueを指定して停止すると、エラー出力がない状態でノードがLOADERでブートします

Views:
26
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
CORE
Last Updated:

環境

ONTAP 9

問題

  • 2つのノードを停止してLOADERに切り替え、両方の電源ステータスがオフになっていることを確認します

Cluster::> system halt -node * -inhibit-takeover true -skip-lif-migration-before-shutdown true -power-off true

Warning: Are you sure you want to power off node "Cluster-01"?
{y|n}: y

Warning: Are you sure you want to power off node "Cluster-02"?
{y|n}: y
2 entries were acted on.

BMC> system power status
Host power is off

  • ノードがリブートしたら、AUTOBOOTが有効になっていてもLOADERにブートし、コンソールログにエラーは出力されません。

LOADER-A> printenv

Variable Name        Value
-------------------- --------------------------------------------------
ARCH                 X86_64
AUTOBOOT             true
AUTOBOOT_FROM        PRIMARY

  • コンソールにエラー出力はなく、次のコマンドを使用して通常のブートでLOADERから実行できます。boot_ontap

Wait BMC self-test result.
BMC self-test: OK.
UPI initialization.
CPU initialization.
Running full memory initialization.
CPU reset.
BIOS Version: 16.6
PEI start.
CPU PEI initialization.
Wait BMC self-test result.
BMC self-test: OK.
UPI initialization.
CPU initialization.
Running full memory initialization.
SPI FLASH: Primary BIOS
PEI end.
DXE start.
USB initialization.
PCI host bridge initialization.
CSM initialization.
PCI Bus initialization start.
BDS start.
Console output devices connect.
Version 2.20.1276. Copyright (C) 2021 American Megatrends, Inc.                
BIOS Date: 09/15/2021 14:57:57 Ver: 16.6

Press <DEL> or <ESC> to enter setup.
Press <F7> to enter Boot Menu.

[System Information]
CPU = 2 Processors
DetectedCPU 0 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz
 Core : 10CPU 1 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz  
 Core : 10Memory Size : 147456 MB

Ready to boot.

Boot Loader version 6.4.12
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2021 NetApp, Inc. All Rights Reserved.

ACPI RSDP Found at 0x6cc33000
LOADER-A> boot_ontap

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.