ONTAP のアップグレード前の検証がエラーで失敗します。次のノードはサポートされていません
環境
- ONTAP 9
問題
- ONTAP のアップグレードの検証チェックを実行する際に、次のエラーが表示されて事前チェックが失敗します。
cluster::> cluster image validate -version 9.X.X It can take several minutes to complete validation... WARNING: There are additional manual upgrade validation checks that must be performed after these automated validation checks have completed successfully. Refer to the Upgrade Advisor Plan or the "What should I verify before I upgrade with or without Upgrade Advisor" section in the "Upgrade ONTAP" documentation for the remaining manual validation checks that need to be performed before update. Upgrade ONTAP documentation available at: https://docs.netapp.com/us-en/ontap/upgrade/index.html The list of checks are available at: https://docs.netapp.com/us-en/ontap/upgrade/task_what_to_check_before_upgrade.html Failing to do so can result in an update failure or an I/O disruption. Please use Interoperability Matrix Tool (IMT http://mysupport.netapp.com/matrix) to verify host system supportability configuration information. Validation checks started successfully. Run the "cluster image show-update-progress" command to check validation status. cluster::> cluster image show-update-progress Update Phase Status Duration Duration -------------------- ----------------- --------------- --------------- Pre-update checks failed 00:10:00 00:01:03 Details: Pre-update Check Status Error-Action -------------------- ----------------- -------------------------------------- Platform status Error Error: The following nodes are not supported: Node1 (AFF-A200), Node2 (AFF-A200). Action: Use the "cluster unjoin" command to remove the unsupported system from the cluster or upgrade the controller hardware before installing the new software release.