メインコンテンツまでスキップ

fcp initiator showでは、アクティブなセッションの一部が表示されません

Views:
14
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san<a>2009186599</a>
Last Updated:

環境

  • ONTAP
    • 9.10.1P2
    • 9.10.1P6
  • 4ノードクラスタ

問題

FCP initiator show すべてのアクティブなセッションを表示しない

  • ホスト側からはすべてのパスが適切に認識され、multipath -llの出力ごとに機能しているように見える。
[root@XXXX ~]# multipath -ll
3600a098038314936772b544939XXXXXX dm-0 NETAPP  ,LUN C-Mode
size=50G features='4 queue_if_no_path pg_init_retries 50 retain_attached_hw_handle' hwhandler='1 alua' wp=rw
|-+- policy='service-time 0' prio=50 status=active
| |- 11:0:1:0 sdd 8:48 active ready running
| `- 12:0:0:0 sdf 8:80 active ready running
`-+- policy='service-time 0' prio=10 status=enabled
  |- 11:0:0:0 sdb 8:16 active ready running
  |- 12:0:2:0 sdc 8:32 active ready running

 
 
  • fcp initiator show すべてのノードに対するすべてのセッションが表示されるわけではありません。

NetApp::*> fcp initiator show
  (vserver fcp initiator show)
      Logical       Port    Initiator   Initiator
Vserver   Interface      Address  WWNN      WWPN      Igroup
--------- ----------------- -------- ------------ ------------ ---------------
XXXX Lif_N2_0d  11800   20:00:00:10:9b:dd:96:XX 10:00:00:10:9b:dd:96:XX XXX3
XXXX Lif_N3_0C  11800   20:00:00:10:9b:dd:96:XY 10:00:00:10:9b:dd:96:XY XXX3

igroup show -v FCイニシエータのセッションもすべて表示されない場合があります。 

  • ただし、running fcp initiator show -node node_nameを指定すると、すべてのセッションが想定どおりに表示されます。


NetApp::*> fcp initiator show -node XXX1
  (vserver fcp initiator show)
      Logical       Port    Initiator   Initiator
Vserver   Interface      Address  WWNN      WWPN      Igroup
--------- ----------------- -------- ------------ ------------ ---------------
XXXX Lif_N1_0C  11800   20:00:00:10:9b:dd:96:XY 10:00:00:10:9b:dd:96:XY XXX3

NetApp::*> fcp initiator show -node XXX2
  (vserver fcp initiator show)
      Logical       Port    Initiator   Initiator
Vserver   Interface      Address  WWNN      WWPN      Igroup
--------- ----------------- -------- ------------ ------------ ---------------
XXXX Lif_N2_0d  11800   20:00:00:10:9b:dd:96:XX 10:00:00:10:9b:dd:96:XX XXX3

NetApp::*> fcp initiator show -node XXX3                        
  (vserver fcp initiator show)
      Logical       Port    Initiator   Initiator
Vserver   Interface      Address  WWNN      WWPN      Igroup
--------- ----------------- -------- ------------ ------------ ---------------
XXXX Lif_N3_0C  11800   20:00:00:10:9b:dd:96:XY 10:00:00:10:9b:dd:96:XY XXX3

NetApp::*> fcp initiator show -node XXX4
  (vserver fcp initiator show)
      Logical       Port    Initiator   Initiator
Vserver   Interface      Address  WWNN      WWPN      Igroup
--------- ----------------- -------- ------------ ------------ ---------------
XXXX Lif_N4_0d  11800   20:00:00:10:9b:dd:96:XX 10:00:00:10:9b:dd:96:XX XXX3

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?