Eシリーズが停止したあとですべてのFlex Arrayディスクをリカバリできません
環境
- ONTAP
- FlexArray
問題
disk showバックエンドの停止からリカバリしたあと、コマンドでは一部のディスクに障害が発生し、AutoSupport ではFDR（障害ディスクレジストリ）が発生していると表示されますSysconfigコマンドで 障害が発生した ディスクは 表示されません。
::> disk show c07e1.13
Disk: c07e1.13
Container Type: broken
Owner/Home: netapp-01 / netapp-01
DR Home: -
Stack ID/Shelf/Bay: - / - / -
LUN: 101
Array: netapp
Vendor: NETAPP
Model: INF-01-00
Serial Number: 60080E5000437690000001D957xxxxxx
UID: 60080E50:00437690:000001D9:57xxxxxx:00000000:00000000:00000000:00000000:00000000:00000000
BPS: 512
Physical Size: 568.8GB
Position: present
Checksum Compatibility: block
Aggregate: -
Plex: -
Paths:
LUN Initiator Side Target Side Link
Controller Initiator ID Switch Port Switch Port Acc Use Target Port TPGN Speed I/O KB/s IOPS
------------------ --------- ----- -------------------- -------------------- --- --- ----------------------- ------ ------- ------------ ------------
netapp-01 0g 101 netapp-sw1:3 netapp-sw1:12 AO INU 20320080e5xxxxxx 0 16 Gb/S 0 0
netapp-01 6b 101 netapp-sw2:2 netapp-sw2:11 ANO RDY 20230080e5xxxxxx 1 16 Gb/S 0 0
netapp-02 0g 101 netapp-sw1:8 netapp-sw1:13 AO INU 20420080e5xxxxxx 0 16 Gb/S 0 0
netapp-02 6b 101 netapp-sw2:7 netapp-sw2:10 ANO RDY 20130080e5xxxxxx 1 16 Gb/S 0 0
Errors:
This disk is in a failed state with the outage reason "failed". The Disk needs to be removed and replaced.
- ただし、ディスクの障害状態を解除しようとしても、障害状態としては表示されません
::> disk unfail c07e1.13
Warning: Failed disk "c07e1.13" may have aggregate labels and file system data present. In that case, this command will attempt to bring this disk back into the aggregate with which this
disk had formerly been associated and preserve file system data. Are you sure you want to continue with disk unfail? {y|n}: y
Error: command failed: Failed to unfail the disk. Reason: Disk is not currently failed.