大規模なクラスタ内のネットワークLIFの数が原因でEMSがsplog.sp.not.accessibleを報告する

最後の更新
PDFとして保存

Views:: 11

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: hw

Last Updated:

環境

ONTAP
AFF A900、AFF A800、AFF A700、AFF A320、AFF A300、 AFF A220、AFF A200、AFF A150、AFF C190
FAS9500、FAS9000、FAS8200、FAS2750、FAS2720、 FAS2650、FAS2720

問題

EMS レポートでは、と報告されます。 splog.sp.not.accessible

2/1/2023 13:58:38 node1 ERROR splog.sp.not.accessible: The SP on the remote node (node2) is not accessible because of The Service Processor on node "node2" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

system node power show コマンドに対して次のエラーメッセージが表示されます。

Error: The Service Processor on node "node2" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again.

Telnetのタイムアウトが発生します。

[root@xxxx~]# telnet xx.xx.xxx.xxx:50000 Trying xx.xx.xxx.xxx... telnet connect to address xx.xx.xxx.xxx: Connection timed out

通常どおりにSPまたはBMCにアクセスできる