メインコンテンツへスキップ

1つのドライブに、IOMによってバイパスされた欠落パスがあります。

Views:
63
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

環境

  • 「システムは、シングルパス、マルチパス、および/またはクワッドパスの接続ストレージの混合構成に移行しました」と報告されている
  • 「DISK REDUNDANCY FAILED」と報告されている

問題

  • ディスクが1つ以上のパスで見つかりません

cluster::> storage show disk -fields initiator
disk initiator
------- -----------------------
1.30.19 3c,3d,3a,3b,3a,3c,3d,3b
1.30.20 3c,3d,3a,3b,3a,3c,3d,3b
1.30.21 3c,3d,3a,3b,3a,3c,3d,3b
1.30.22 3d,3a,3a,3d
1.30.23 3c,3d,3a,3b,3a,3c,3d,3b

  • ディスクには、想定よりも少ない数のSASパスが存在します。1 (マルチパスHA用にケーブル接続されたHAペアを以下に示します):
cluster::*> storage disk show -fields model,path-count -path-count !4 
disk model path-count -------- ---------------- ---------- 1.30.22 X357_S16433T8ATE 2 

注記1外部ディスクシェルフを備えたシングルノード(非HA)システム、内部ディスクのみを備えたシステム(例:AFF A200 または FAS2700)、またはシングルパス専用に配線されたシステムの場合は、パス数を !2 に変更します。同様に、クワッドパスケーブルシステム(IOM12 のみ)の場合は、パス数を !8 に変更します。

  • ディスクにパスがありません (nodeshell):
cluster::> node run -node * storage show disk -p 2 entries were acted on.
Node: cluster-n01 PRIMARY PORT SECONDARY PORT SHELF BAY -------- ---- --------- ---- --------- ... 0b.30.21 A 1c.30.21 B 30 21 0b.30.22 A 30 22 0b.30.23 A 1c.30.23 B 30 23 ...
  • イベントログに過剰な無効なDWORDエラーが報告されました

ds.sas.drivephy.disableErr:error]: Disk  [NETAPP :X477_HAKPE04TA0:NA0] S/N [XXXX] on channels 0b shelf ID 30 IOM B bay 22 Disabled due to excessive invalid dword error.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.