ONTAP Select：新規導入時にネットワーク接続チェッカーのクイックチェックが失敗する
環境
- ONTAP Select
- マルチノード導入
- VMware vSphere
問題
新しいONTAP Selectクラスタのクイックネットワーク接続チェッカーを導入すると、次のエラーが発生して失敗します。
An error occurred while performing a ping from host (192.168.0.6) to host2 (192.168.0.7) with all links up. Many network configuration issues can cause issue. Suggestions:
1. Verify that the host is connected to at least one uplink in the 'up' state.
2. Verify that the sending and receiving uplinks are part of the same VLAN.
3. Verify that the STP setting on the physical switch is correct.
The reccomended STP setting on the switch ports connected to the host host 'Edge/PortFast'
If a cluster has been deployed and subsequently reconfigured outside of ONTAP Select Deploy, run a refresh operation on the cluster, and then try again.