「 SensorReadingFailed 」：エレメントソフトウェアで IPMI 診断が現在応答していません

環境

• NetApp Element ソフトウェア
• NetApp Hシリーズ ストレージ ノード
• NetApp SF-Series ストレージノード

問題

NetApp SolidFire Active IQ から報告されるアラートは次のとおりです。

• NetApp Element ソフトウェア12.7の場合：
  • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
  • BmcSelfTestFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
• NetApp Element ソフトウェア12.5の場合：
  • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
  • BmcSelfTestFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
• NetApp Element ソフトウェア 12.3 では、次の手順を実行
  • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
  • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
• NetApp Element ソフトウェア 12.2 では、次の手順を実行
  • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
  • Only a single complete copy of the block data is accessible. Restore any offline nodes or block services or contact support for assistance.
• Element ソフトウェア 11.x 以降：
  • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
  • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
  • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
• Element ソフトウェア 10.x 以前：
  • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.