AFF A400 e3a または e3b ポートは BES-53248 クラスタスイッチにリンクされません
環境
- AFF A400
- X1151A 2 ポート 100GbE スマート I/O NIC
- 100GBASE-CR4 銅ケーブル(
auto-100g_cr4-fd-up
) - Broadcom BES-53248 クラスタネットワークスイッチ
- Broadcom 対応 BES-53248 クラスタスイッチを使用した 2 ノードスイッチクラスタへの移行
問題
- AFF A400のスロット3にあるX1151AカードのクラスタポートとBES-53248スイッチポートの間のリンクは確立されていません。
- スイッチポートの出力例:
(switch)# show port 0/53-0/54
Admin Physical Physical Link Link LACP Actor
Intf Type Mode Mode Status Status Trap Mode Timeout
--------- ------ --------- ---------- ---------- ------ ------- ------ --------
0/53 Enable 100G Full Down Enable Enable long
0/54 Enable 100G Full Down Enable Enable long
- ノードクラスタポートの出力例:
dbnass5215::>network port show -ipspace Cluster
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----------- --------
e3a Cluster - down 9000 auto/auto -
e3b Cluster - down 9000 auto/auto -
- ONTAP EMS メッセージ:
ERROR netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported ) installed in e3a is not supported with this network interface.
ERROR netif.sfpNotSupported: The SFP+ or QSFP+ module (not supported ) installed in e3b is not supported with this network interface.