メインコンテンツまでスキップ

スイッチの設定変更後にインターフェイスグループが停止しています

Views:
36
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
network<a>2009268803</a>
Last Updated:

環境

  • ONTAP 9
  • LACPインターフェイスグループ(ifgroup)
  • Ciscoスイッチ
  • (仮想)ポートチャネル

問題

  • インターフェイスグループ a0b は2つのリンクで構成されますが、物理的に接続されるのは1つだけです
a0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=6407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether f6:e9:d4:f4:35:40 hwaddr f6:e9:d4:f4:35:40 pcp 1 laggproto lacp lagghash l3 lagg options: flags=1<USE_FLOWID> flowid_shift: 16 lagg statistics: active ports: 1 flapping: 0 lag id: [(8000,F6-E9-D4-F4-35-40,0032,0000,0000), (0001,00-23-04-EE-BF-2D,801B,0000,0000)] laggport: e0f flags=20000<DEFAULT> state=41<ACTIVITY,DEFAULTED> [(8000,F6-E9-D4-F4-35-40,8008,8000,0008), (FFFF,00-00-00-00-00-00,0000,FFFF,0000)] input/output LACPDUs: 0 / 0 laggport: e0h flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> state=3d<ACTIVITY,AGGREGATION,SYNC,COLLECTING,DISTRIBUTING> [(8000,F6-E9-D4-F4-35-40,0032,8000,000A), (0001,00-23-04-EE-BF-2D,801B,8000,4141)] input/output LACPDUs: 44310 / 44304
 
slot 0: 1G/10G Ethernet Controller CNA EP 8324 (Multiple Dual-port, QLogic CNA 8324(8362) rev. 2) e0f MAC Address: 00:a0:98:dc:48:91 (auto-unknown-fd-down) e0e MAC Address: 02:a0:98:dc:48:9c (auto-10g_sr-fd-up) e0h MAC Address: f6:e9:d4:f4:35:40 (auto-10g_sr-fd-up) e0g MAC Address: 00:a0:98:dc:48:92 (auto-unknown-fd-down) Device Type: EP8324N
  • 正常に稼働しているリンクがダウンして復旧したが、トラフィックを処理できない
Thu Aug 11 16:54:42 +0200 [NetApp-2-W81-03: intr: netif.linkDown:info]: Ethernet e0h: Link down, check cable. Thu Aug 11 16:54:42 +0200 [NetApp-2-W81-03: intr: netif.linkDown:info]: Ethernet a0b: Link down, check cable. Thu Aug 11 16:54:42 +0200 [NetApp-2-W81-03: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0b, port e0h has transitioned to an inactive state. The interface group is in a degraded state. Thu Aug 11 16:54:42 +0200 [NetApp-2-W81-03: intr: netif.linkDown:info]: Ethernet a0b-98: Link down, check cable. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.portdown:notice]: A link down event was received on node NetApp-2-W81-03, port e0h. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.portdown:notice]: A link down event was received on node NetApp-2-W81-03, port a0b. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.portdown:notice]: A link down event was received on node NetApp-2-W81-03, port a0b-98. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.lifmoved.linkdown:notice]: LIF sv_svm_sw100_esx_dmz_01_nfs_lif1 (on virtual server 22), IP address 10.135.101.9, is being moved to node NetApp-2-W81-04, port a0b-98. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.lifBeingRemoved:notice]: LIF sv_svm_sw100_esx_dmz_01_nfs_lif1 (on virtual server 22), IP address 10.135.101.9, is being removed from node NetApp-2-W81-03, port a0b-98. Thu Aug 11 16:54:45 +0200 [NetApp-2-W81-03: vifmgr: vifmgr.lifdown.noports:alert]: LIF sv_svm_sw100_esx_dmz_01_nfs_lif1 (on virtual server 22), IP address 10.135.101.9, currently cannot be hosted on node NetApp-2-W81-03, port a0b-98, or any of its failover targets, and is being marked as down. Thu Aug 11 16:54:57 +0200 [NetApp-2-W81-03: intr: netif.linkUp:info]: Ethernet e0h: Link up.
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.