メインコンテンツまでスキップ

ONTAP のアップグレード後に Vscan が接続されない

Views:
83
Visibility:
Public
Votes:
0
Category:
element-plug-in-for-vcenter-server
Specialty:
nas
Last Updated:

環境

  • ONTAP 9.6以前upgraded からONTAP 9.7以降に移行している必要があります
  • -または- ONTAP 9.7をONTAP 9.8にアップグレード
  • AV コネクタ 1.0.4
  • Vscan

問題

  • ONTAP のアップグレード後( 9.5 から 9.7 へ)にバグ 1229243 を修正すると、理由のない Vscan サーバが切断されます
    cluster::> vserver vscan connection-status show-extended-stats -instance
  • AVコネクタとVscan Windowsサービスは正常に実行されています
  • AVコネクタのテスト接続のポーリングテストと、クラスタ管理LIFまたはSVM管理LIFへのpingが成功したことを確認します
  • Vscan Windowsサービスが変更なしで再起動され、接続がない状態でログが記録されました
  • AV コネクタのデバッグログで次の手順を実行します 
    01/24/21-17:03:06.785Z [Pipe: CLUSTER.DOMAIN.com, vserverCLUSTER][r] CreateNamedPipe failed with 3. closingQ: [0]
    01/24/21-17:03:06.816Z Not even one usable LIF for [vserverCLUSTER], abandoning open

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.