メインコンテンツまでスキップ

Error :ホストからの abort コマンドの発行

Views:
419
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
san
Last Updated:

環境

  • ONTAP OS : 7 モードまたは clustered Data ONTAP (任意) 
  • プロトコル: FCP および iSCSI 
  • ホスト OS : any

問題

  • ホストログの確認中に、 1 つ以上の「 aborted commands 」または「 aborted I/O 」メッセージが表示されます。正確なメッセージはホストのオペレーティング・システムや HBA のモデル / ドライバによって異なりますが ' 一般的にエラーは次のようになります
  • エラーが発生したポートやテイクオーバーを無効にするとホストが解決します エラーとパフォーマンスは正常な状態に戻ります 


Linux:
Apr 16 09:13:34 Rhel01 kernel: qla2xxx 0000:08:00.0: scsi(3:1:30): Abort command issued -- 1 368ccd8 2002


VMware :
2017-11-29T23:30:12.469Z cpu0:33586)NMP: nmp_ThrottleLogForDevice:3333: Cmd 0x28 (0x43b658ca5680, 34912) to dev "naa.600a09803830374a7a2b49316b4a6433" on path "vmhba1:C0:T2:L1" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x3f 0xe. Act:EVAL

Or

2016-01-31T23:14:36.250Z cpu45:33200)<7>fnic : 1 :: Abort Cmd called FCID 0xb0020, LUN 0x7 TAG 74 flags 3
2016-01-31T23:14:36.250Z cpu6:33199)<7>fnic : 1 :: Abort Cmd called FCID 0xb0020, LUN 0x5 TAG 75 flags 3
2016-01-31T23:14:36.257Z cpu19:32787)<7>fnic : 1 :: abts cmpl recd. id 116 status FCPIO_SUCCESS
2016-01-31T23:14:36.257Z cpu45:33200)<7>fnic : 1 :: Returning from abort cmd type 2 SUCCESS
2016-01-31T23:14:36.257Z cpu19:32787)<7>fnic : 1 :: abts cmpl recd. id 117 status FCPIO_SUCCESS
2016-01-31T23:14:36.257Z cpu6:33199)<7>fnic : 1 :: Returning from abort cmd type 2 SUCCESS


Windows :
Information   10/24/2017 8:49:54 PM   ontapdsm   61117   None   IO error: SRB Status Aborted reported on LUN 18 on Path Id 01000001. The IO will be retried.
Warning     10/24/2017 8:49:46 PM   disk     153    None   The IO operation at logical block address 0x5f4ee4 for Disk 13 (PDO name: \Device\MPIODisk3) was retried.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device