メインコンテンツまでスキップ

負荷が高いときに FCP の速度低下と SRAM ダンプを実行します

Views:
22
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

環境

  • ONTAP 9
  • SAN
  • Fibre Channel(FC)

問題

  • FCP LUN を利用しているサーバがあるユーザから報告される速度が低下している
  • スケジュールされたジョブまたは計画されたワークロードを環境で実行中です
  • 30 台以上のホストと 10 台以上のストレージノードを大規模に導入
  • QoS ボリュームレイテンシ show は、ネットワークがレイテンシの最大の要因であることを示します
 cluster::> qos statistics volume latency show -vserver vserver -volume volume Workload ID Latency Network Cluster Data Disk QoS Max QoS Min NVRAM Cloud FlexCache SM Sync VA --------------- ------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- -total- - 24.15ms 22.90ms 15.00us 751.00us 480.00us 0ms 0ms 3.00us 0ms 0ms 0ms 0ms VOLUME 2178 1101.45ms 1101.34ms 6.00us 68.00us 36.00us 0ms 0ms 2.00us 0ms 0ms 0ms 0ms -total- - 21.09ms 19.98ms 11.00us 719.00us 375.00us 0ms 0ms 2.00us 0ms 0ms 0ms 0ms VOLUME 2178 995.61ms 995.50ms 6.00us 49.00us 50.00us 0ms 0ms 1.00us 0ms 0ms 0ms 0ms -total- - 26.80ms 25.16ms 12.00us 1206.00us 423.00us 0ms 0ms 3.00us 0ms 0ms 0ms 0ms VOLUME 2178 1107.57ms 1107.45ms 4.00us 69.00us 45.00us 0ms 0ms 2.00us 0ms 0ms 0ms 0ms -total- - 22.77ms 21.48ms 13.00us 893.00us 376.00us 0ms 0ms 3.00us 0ms 0ms 0ms 0ms VOLUME 2178 1486.07ms 1485.96ms 6.00us 58.00us 51.00us 0ms 0ms 1.00us 0ms 0ms 0ms 0ms -total- - 27.85ms 26.33ms 19.00us 1199.00us 299.00us 0ms 0ms 3.00us 0ms 0ms 0ms 0ms VOLUME 2178 1439.01ms 1438.94ms 3.00us 52.00us 9.00us 0ms 0ms 2.00us 0ms 0ms 0ms 0ms 
  • 複数のストレージノードの複数のボリュームにパターンなしで影響が及びます
  • 複数のストレージノードで SRAM ダンプ、ポートリセット、しきい値に達した、またはリンク切断エラーが断続的にログに記録されます

Sun Feb 21 XX:XX:XX -0500 [NODE: fct_tpd_thread_15: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 10a, fct_tpd_check_hung_commands: Command termination hung. cmd:0xfffff817e09cdb70 (state=0xa, flags=0x2,ctio_sent=1/1, RecvExAddr=0x11e620, OX_ID=0x4439, RX_ID=0xffff, SID=0x2729e2)

Sun Feb 21 XX:XX:XX -0500 [NODE: fct_tpd_thread_15: scsitarget.fct.reset:notice]: Resetting Fibre Channel target adapter 10a.

Sun Feb 21 XX:XX:XX -0500 [NODE: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO TPD cmd alloc threshold reached handle:7 taskflags:128 Active commands:3891 threshold:3891

Sun Feb 21 XX:XX:XX -0500 [NODE: fct_tpd_work_thread_0: scsitarget.ispfct.linkBreak:error]: Link break detected on Fibre Channel target adapter 2a. Firmware status code status1 0x2, status2 0x7, and status4 0x0.

  • クライアントの MPIO はラウンドロビンポリシーで適切に設定されており、最適化されたすべての IO パスがアクティブです(ファブリックごとに 2 つのパス)。
  • スイッチの Low ポート廃棄数が増分し、 SFP パワー受信 / 送信が下限しきい値になっていません

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.