メインコンテンツまでスキップ

ホストから Filer への接続が劣化した場合のトラブルシューティング方法

Views:
392
Visibility:
Public
Votes:
0
Category:
data-ontap-dsm-for-windows-mpio
Specialty:
san
Last Updated:

環境

SAN プロトコル

説明

マルチパス(MPIO)ソフトウェアを使用すると、ホストはLUNへの複数のパスを維持できます。LUNが存在するNetAppノードへのパスは「アクティブ/最適化」とみなされ、ノードのHAパートナー経由のパスは「アクティブ/最適化されていない」とみなされます。具体的な用語は、ホストオペレーティングシステムとマルチパスドライバによって異なります。状況によっては、1つ以上のパスにアクセスできなくなったり、I/Oに使用できなくなったりすることがあります。使用できないパスによっては、特に「アクティブ/最適化」されたパスが残っていない場合、ホストのパフォーマンスが低下することがあります。 

パスの状態は、 ALUAを使用して現在LUNを所有しているノードによって決まります。テイクオーバーが発生すると、パートナーのLUNの所有権を引き継ぐノードを経由するパスが「アクティブ/最適化」になります。

RedHatの「multipath -ll」出力におけるパス障害の例: 

# multipath -ll
mpath0 (360a9800043346441464a44424c746e54)
[size=10 GB][features="1 queue_if_no_path"][hwhandler="0"]
_ round-robin 0 [prio=8][active]
_ 0:0:0:0 sda 8:0   [failed][faulty]
_ 1:0:0:0 sdi 8:128 [active][ready]
_ round-robin 0 [prio=2][enabled]
_ 0:0:1:0 sde 8:64  [active][ready]
_ 1:0:1:0 sdm 8:192 [active][ready]

RedHat '/var/log/messages'例

Jun 22 15:55:54 rhel1 multipathd: Lun1: sdcr - tur checker reports path is down
Jun 22 15:55:54 rhel1 multipathd: checker failed path 69:240 in map Lun1
Jun 22 15:55:54 rhel1 multipathd: Lun1: remaining active paths: 3
Jun 22 15:55:54 rhel1 kernel: device-mapper: multipath: Failing path 69:240.


:VMware 'vmkernel'例:

2017-11-30T07:17:41.351Z cpu15:33143)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe: NMP device "sym.029025256531353837" state in doubt; requested fast path state update...
2017-11-30T07:17:41.351Z cpu15:33143)WARNING: ScsiPath: 4507: Path vmhba2:C0:T0:L55 is being removed
2017-11-30T07:17:41.351Z cpu15:33143)WARNING: ScsiPath: 6117: Remove path: vmhba2:C0:T0:L55


Windows 'System Event Log'例:

Information   10/31/2017 4:39:33 PM   mpio     46    None   Path 1000001 was removed from \Device\MPIODisk2 due to a PnP event. The dump data contains the current number of paths.
Information   10/31/2017 4:39:33 PM   ontapdsm   61070   None   Path ID 01000001 was removed.
Warning     10/31/2017 4:39:33 PM   ontapdsm   61054   None   Path ID 01000001 has failed and 02000101 will be used instead.
Error      10/31/2017 4:39:33 PM   ontapdsm   61142   None   Path ID 01000001 has failed.


: 正確なログエントリは、オペレーティングシステムのバージョンやマルチパスの設定方法によって異なります。 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.