メインコンテンツまでスキップ

マザーボードの交換後、PCMがブートできず、「The incorrect NVMEM battery is installed」というメッセージが表示されます

Views:
39
Visibility:
Public
Votes:
0
Category:
fas-systems<a>NVMEMバッテリ</a><a>FSE</a><a>271-00045</a><a>FCC</a>
Specialty:
hw
Last Updated:

環境

  • AFF A400、C400、FAS8300、FAS8700
  • AFF C190、 AFF-A150 AFF A220、FAS2720、FAS2750
  • AFF A800、AFF C800

問題

  • 環境セクションのPOSTマザーボード(PCM)交換モデルでは、 ブート中に次のエラーが発生します。

Apr 27 08:31:18 [Node1:nvmem.battery.unread:EMERGENCY]: The NVMEM battery state cannot be determined because the 'Bat Initial FCC' sensor is unreadable. To prevent data loss, the system will shut down in 5 minutes.
Apr 27 08:31:18 Power outage protection flash de-staging: 28 cycles
 
WARNING:  The battery is unfit to retain data during a power
          outage.  This is likely because the battery is
          discharged but could be due to other temporary
          conditions.
          When the battery is ready, the boot process will
          complete and services will be engaged.
          To override this delay, press 'c' followed by 'Enter'
Apr 27 08:32:18 [Node1:callhome.battery.failure:EMERGENCY]: Call home for BATTERY ('Bat Initial FCC' unreadable) CRITICAL.
Apr 27 08:32:19 [Node1:nvmem.battery.packInvalid:EMERGENCY]: The incorrect NVMEM battery is installed. Expected part number is 271-00045. To prevent data loss, the system will shut down in 5 minutes.
Apr 27 08:32:49 [Node1:callhome.battery.failure:EMERGENCY]: Call home for BATTERY (invalid pack) CRITICAL.
Apr 27 08:33:21 Power outage protection flash de-staging: 30 cycles
^CApr 27 08:35:23 Power outage protection flash de-staging: 31 cycles
Apr 27 08:37:25 Power outage protection flash de-staging: 32 cycles
Apr 27 08:39:27 Power outage protection flash de-staging: 33 cycles
Apr 27 08:41:29 Power outage protection flash de-staging: 34 cycles
 
****************************
* Power Fail - Please Wait *
****************************  

  • その後、ノードがシャットダウンされます。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.