メインコンテンツまでスキップ

温度センサーが2分以内に正常に戻りましたが、環境がシャットダウンされました

Views:
99
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
hw<a>2008554007</a>
Last Updated:

環境

  • ONTAP 9
  • サービス プロセッサ(SP)
  • SP 5.x

問題

温度センサーが2分以内に正常に戻りましたが、環境シャットダウンしました。

例:

  • EMSのsystem show temperatureはOKですが、2分後にシャットダウンします。

21 Nov 2020 03:40:27 [NSPAVM105: alert] env_mgr monitor chassisTemperature warm: describe_toowarm="CPU0 Temp Margin is critical high (88 C)."
21 Nov 2020 03:40:27 [NSPAVM105: emergency] env_mgr monitor shutdown chassisOverTemp: describe_toohot="CPU0 Temp Margin is critical high. System will be shutdown in 2 minutes"
21 Nov 2020 03:40:27 [NSPAVM105: emergency] Chassis temperature is too high..
21 Nov 2020 03:40:37 [NSPAVM105: notice] env_mgr monitor chassisTemperature ok:
21 Nov 2020 03:41:26 [NSPAVM105: emergency] env_mgr callhome chassis overtemp: subject="CHASSIS OVER TEMPERATURE SHUTDOWN"
21 Nov 2020 03:42:28 [NSPAVM105: emergency] statd monitor shutdown emergency: reason="Environmental Reason Shutdown (Temperature critical)"

  • SPイベントでは、温度センサーはすべて正常であることが示されますが、システムは2分でシャットダウンします。

Record 1218: Fri Nov 20 19:40:23 2020 [IPMI.notice]: 6b01 | 02 | EVT: 015758f5 | CPU0_Temp_Margin | Assertion Event, "Upper Non-critical going high"
Record 1219: Fri Nov 20 19:40:23 2020 [IPMI.notice]: 6c01 | 02 | EVT: 015958ff | CPU0_Temp_Margin | Assertion Event, "Upper Critical going high"
Record 1220: Fri Nov 20 19:40:33 2020 [IPMI.notice]: 6d01 | 02 | EVT: 8159ccff | CPU0_Temp_Margin | Deassertion Event, "Upper Critical going high"
Record 1221: Fri Nov 20 19:40:33 2020 [IPMI.notice]: 6e01 | 02 | EVT: 8157ccf5 | CPU0_Temp_Margin | Deassertion Event, "Upper Non-critical going high"
Record 1222: Fri Nov 20 19:40:55 2020 [IPMI.notice]: 6f01 | 02 | EVT: 0301ffff | Attn_Sensor1 | Assertion Event, "State Asserted"
Record 1223: Fri Nov 20 19:41:03 2020 [IPMI.notice]: 7001 | 02 | EVT: 0300ffff | Attn_Sensor1 | Assertion Event, "State Deasserted"
Record 1224: Fri Nov 20 19:42:23 2020 [IPMI.emergency]: triggered OS halt: Temperature critical

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device