メインコンテンツまでスキップ

NIC では、 SFP の交換後も CRC エラーが発生します

Views:
156
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • AFF A400
  • 10G / 25G イーサネットポート e0g/e0h
  • SFP の交換
  • LC 光ケーブル

問題

  • でオンラインになっているポートが表示される sysconfig -a
::> run -node <node_name> -command sysconfig -a
 slot 0: 10G/25G Ethernet Controller CX5-Mezz e0g MAC Address: d0:39:ea:xx:xx:xx(auto-10g_sr-fd-up) SFP Vendor: FINISAR CORP. SFP Part Number: FTLX8574D3BCL SFP Serial Number: xxx e0h MAC Address: d0:39:ea:xx:xx:xx (auto-10g_sr-fd-up) SFP Vendor: FINISAR CORP. SFP Part Number: FTLX8574D3BCL SFP Serial Number: xxx Device Type: CX5 PSID(NAP0000000007) Firmware Version: 16.26.4012 
 
  • ストレージポートの SFP は最近交換済み
  • ifstat は、 SFP の交換後も、影響を受けるポートでの CRC エラーの増加を示しています
 
::> run -node <node_name> -command ifstat 

-- interface  e0g  (7 hours, 33 minutes, 13 seconds) --

RECEIVE
Total frames:    10739k | Frames/second:     395  | Total bytes:     14537m
Bytes/second:      534k | Total errors:     4947  | Errors/minute:      11
Total discards:      0  | Discards/minute:     0  | Multi/broadcast:   334k
Non-primary u/c:     0  | CRC errors:       4921  | Runt frames:         0
Fragment:            0  | Long frames:         0  | Jabber:              0
No buffer:           0  | Xon:                 0  | Xoff:                0
Pause:               0  | Jumbo:            1645k | Noproto:             0
Error symbol:        0  | Illegal symbol:     26  | Bus overruns:        0
Queue drops:         0  | LRO segments:     8397k | LRO bytes:       14247m
LRO6 segments:       0  | LRO6 bytes:          0  | Bad UDP cksum:       0
Bad UDP6 cksum:      0  | Bad TCP cksum:       0  | Bad TCP6 cksum:      0
Mcast v6 solicit:    0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device