メインコンテンツまでスキップ

メモリの合計使用量が 100% 未満になると、 Active IQ Unified Manager が「メモリ不足」状態で警告するのはなぜですか?

Views:
16
Visibility:
Public
Votes:
0
Category:
active-iq-unified-manager
Specialty:
om
Last Updated:

すべてのとおり  

環境

  • OnCommand Unified Manager 7.x ( UM )
  • OnCommand Unified Manager 9.4 ( UM )
  • OnCommand Unified Manager 9.5 ( UM )
  • Active IQ Unified Manager 9.6+ ( AIQUM ) 

回答

Unified Manager ( UM )で、メモリ不足を示すバナーメッセージが通知または表示されることがあります。これは、総メモリ使用率が 100% 未満のシステムで、ホスト内を見ても、仮想化ホストの場合は VMware 内で見ても発生します

UM アプリケーションの基盤となる各コンポーネントに最大メモリ値が設定されます。基盤となる各コンポーネントは、ホストオペレーティングシステムから報告される合計メモリの事前定義された割合を受け取るようにコード化されています
 

サービス名 %
OCIE サーバーサービス 37%
OCIE Acquisition Service の略 18%
MySQL 22%

:これらの割合は、アプリケーションのバージョン間で変動することがあり

ます。これらのすべてのコンポーネントに割り当てられたすべてのメモリの合計値は、ホストが使用できるメモリの合計値より小さくなります。これは、設計上のものです。  
システム全体に使用可能なメモリが残っているにもかかわらず、各コンポーネントが、その特定のプロセスに割り当てられた定義済みのメモリをすべて消費することが可能です

上記の割合例を使用
すると、ホストのメモリの他の 63% が空いているか、パフォーマンス関連の問題を解決するために使用されているかに関係なく、このサービスがホストのメモリの最大 37% を使用する場合、ホストシステムのメモリをさらに増やす必要があります。システムに追加されたメモリによって、各 UM コンポーネントで使用できるメモリが増加します

注:メモリ使用量は、監視対象のクラスタ、ノード、ボリューム、またはその他のオブジェクトの数、データベースのサイズ、データ保護の統合、または実行中の多数のレポートに関連するパフォーマンスの考慮事項によって左右される場合があります

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.