メインコンテンツまでスキップ

H610S をクラスタに追加した後、「 BIOS 設定が正しくありません」という警告が表示される

Views:
35
Visibility:
Public
Votes:
0
Category:
h-series
Specialty:
solidfire
Last Updated:

のしんだ

に適用されます

  • NetApp H610 ストレージノード

問題

After adding a new or replacement node to a cluster, ハードウェア構成の不一致とnodeHardwareFault アラート such as the following are logged:
 
  • Incorrect bios setting "CPU Stepping" should be == <0> but is <7>
  • Incorrect bios setting "System RAS Type" should be == <0> but is <6>
  • Incorrect bios setting "ME PTT Supported" should be == 0 but is 1
  • Incorrect bios setting "PCIE Port assigned to LAN" should be == <0> but is <5>
  • Incorrect bios setting "PCH Stepping" should be == <0> but is <53>
  • Incorrect bios setting "Gbe Region Valid" should be == [00]Disable but is [01]Enable
  • Incorrect bios setting "Anti Flash Wearout Supported" should be == 0 but is 1
  • Incorrect bios setting "IP Port" should be == <65535> but is <443>
  • Incorrect bios setting "FPK Port 3 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 2 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 1 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 0 Present" should be == 0 but is 1
  • Incorrect bios setting "Current IPMI over LAN" should be == [FF]Unknown but is [01]Enabled
  • NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)
  • NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support