メインコンテンツまでスキップ

複数のAFF およびFAS プラットフォームでブートデバイスの読み取りまたは書き込みを一時的に実行できないと、システムが停止します

Views:
575
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

環境

  • AFF A200 | FAS2620 | FAS2650
  • AFF A220 | AFF C190 | FAS2720 | FAS2750
  • AFF A300 | FAS8200
  • FAS8300
  • AFF A700 | FAS9000
  • AFF A900 | FAS9500
  • mSATAブートデバイス(P/N X3320A)
  • ONTAP OSを起動できない

問題

ブートデバイスで問題が発生しているノードはパニック状態になるか、ONTAPのブートに失敗します。

パニック文字列

PANIC: thread (xxx) on cpu hung for 4001 milliseconds in process xxx

PANIC: thread (swi4: clock) on cpu 0 hung for 4001 milliseconds in process swi4: clock on release 9.5P1 (C) on Thu Jun 11 03:41:13 EDT 2020
 
PANIC: thread (md0.uzip) on cpu 0 hung for 4001 milliseconds in process md0.uzip on release 9.3P20 (C) on Tue Feb  2 22:28:58 JST 2021

Panic string: Process mgwd unresponsive for 620 seconds in process

PANIC: g_vfs_done(): rootfs.uzip read error - suspect boot device in process g_up on release 9.7P4 (C) on Tue Aug 11 02:55:33 EDT 2020

EMSログ

パニックの前にEMSログに次のメッセージが表示されることもあります。

 cam: cam.timeout.retry:notice]: CAM device driver I/O timeout. Details: CAM command timeout (retrying), Device ada0 (4 retries left). Device ID: SPG2153013S. Command: WRITE_DMA. ACB: ca 00 bb 88 88 40 00 00 00 00 70 00.
起動失敗時のコンソール起動メッセージ

ONTAPブートを試行したときに表示されるコンソールメッセージは次のとおりです。

  • ノードをブートできず、コンソールログのブートデバイスエラーが表示される:

g_vfs_done():ada0s1[READ(offset=1754742784, length=8192)]error = 5
ada0: CAM_CMD_TIMEOUT, retrying (4 retries left)
ada0: CAM_CMD_TIMEOUT, retrying (3 retries left)
ada0: CAM_CMD_TIMEOUT, retrying (2 retries left)
ada0: CAM_CMD_TIMEOUT, retrying (1 retry left)
Unable to read directoryRetry #5 of 5: /sbin/fsck_msdosfs /dev/ada0s1
bootarg.init.verify_checksum="true"
** /dev/ada0s1
** Phase 1 - Read and Compare FATs
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Unable to read directory
********************************************************
* ALERT: Boot device file system corruption detected:  *
* FAT filesystem check exited with status   8          *
*                                                      *
* File system consistency check failed.                *
* The node will be halted.                             *
* Contact Support for assistance.                      *
********************************************************
Uptime: 17s
System halting...

  • リブート失敗の例:
Could not load fat://boot0/X86_64/freebsd/image1/kernel:Device not found ERROR: Error booting OS on: 'boot0' file: fat://boot0/X86_64/freebsd/image1 /kernel (boot0,fat) Could not load fat://boot0/X86_64/freebsd/image1/kernel:Device is open ERROR: Error booting OS on: 'boot0' file: fat://boot0/X86_64/freebsd/image1/kernel (boot0,fat)

ERROR: Failure to build endpoint environment variables. Autoboot will be disabled.

  • プラットフォームがnosavecoreプラットフォームの場合は、コアを保存できません。

savecoreおよびnosavecore AFFおよびFASプラットフォームとは何ですか

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.