SwitchPowerNotOperation_Alert - AutoSupport メッセージ
環境
- ONTAP 9
- MetroCluster ヘルスモニタリング(ファイバチャネルスイッチ)
- クラスタネットワークのメッシュ
- Brocade
- Cisco
- ヘルスモニタプロセスcshm:SwitchPowerNotOperation_Alertのホームにお問い合わせください
イベント サマリ
スイッチPowerNotOperation_Alertは、クラスタスイッチの動作ステータスがNot Operationalとなっている場合に送信されます。
検証
AutoSupportメッセージ
HA Group Notification from Cluster-04 (Health Monitor process cshm: SwitchPowerNotOperational_Alert[CN1610-down/PowerSupply-2]) ALERT
EMSログ
event log show -severity * -message-name callhome*
[Node Name: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process cshm: SwitchPowerNotOperational_Alert[Switch Name/PowerSupply-1].
Command Line
system health alert show -node <node name> -monitor cluster-switch -alert-id SwitchPowerNotOperational_Alert
Node Reporting Node Name
Monitor cluster-switch
Alert ID SwitchPowerNotOperational_Alert
Alerting Resource CN1610-up/PowerSupply-1
Subsystem Switch-Health
Indication Time <date/time>
Perceived Severity Major
Probable Cause Out_of_service
Corrective Actions 1) Ensure that the power supply unit (PSU) is turned on through switch CLI.
2) Run diagnostics on switch to check the operational status of PSU. For instructions about how to run switch diagnostics, see the switch's configuration guide
解決策
次の手順を実行してください。
- 電源装置が取り付けられていることを確認します。
- 電源装置に電力が供給されていることを確認します。
- 電源装置が故障していると判断された場合は、交換してください。
- Brocadeスイッチの場合は、ネットアップテクニカルサポートにお問い合わせください。
- Ciscoスイッチについては、シスコにお問い合わせください
- CN1610スイッチの場合は、ネットアップテクニカルサポートにお問い合わせください。